- New
- New
- Reduced price
- Promotion
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Index: AKS-10816
- Reduced price
- Promotion
- Reduced price
- Promotion
List of products by brand Modulogy
Modulogy is a Polish company that produces high-class extensions, electronic modules and development kits compatible with platforms such as Raspberry Pi, Arduino or STM32 Nucleo. The offer includes, among others, executive modules, converters, potentiometers, buttons, GPIO adapters, PWM drivers and many other items. In our assortment you will find many original Modulogy products at attractive prices.
Loading...
Module with ATmega328P - MOD-10
The module allows to create projects based on AVR ATmega328 microcontroller with the possibility of programming via Arduino IDE. The circuit has connectors matched to the...
Index: MOD-02828
Index: MOD-02828
- EOL
MicroSD card reader module with buffer and stabilizer - MOD-13
Micro SD card reader module with goldpin connectors - 2.54 mm raster for self soldering. It communicates with the motherboard through the SPI interface, has a built-in buffer...
Index: MOD-02830
Index: MOD-02830
- EOL
Logic level bi-directional converter, 8-channel - MOD-12
The module allows communication between systems using the most popular voltage levels: from 1.2 V to 5.5 V and vice versa. Eight channels allow the connection of different...
Index: MOD-02829
Index: MOD-02829
- EOL
Rotary switch, pulser, encoder with transducer - MOD-16
A knob in the form of an encoder together with a button, allows to create a simple user interface. The module sends a digital signal to the S2 and S3 outputs depending on the...
Index: MOD-02831
Index: MOD-02831
- EOL
8-channel LED logic tester, 2-way - MOD-18
The module allows to visually check the states of the microcontroller outputs. It allows you to easily verify the operation of bit operations such as logical sum, shift or...
Index: MOD-02834
Index: MOD-02834
- EOL
Miniature 10kΩ digital potentiometer - MOD-19
A digital potentiometer module that allows you to change the resistance using two up and down leads. The supply voltage is from 2.7 V to 5.5 V.
Index: MOD-02835
Index: MOD-02835
- EOL
Bistable touch button AT42QT1012 - MOD-21
Circuit with bistable touch button AT42QT1012 integrated in the PCB mosaic. When the touch is detected, the OUT output changes to the opposite state. The module is powered from...
Index: MOD-02836
Index: MOD-02836
- EOL
16-channel driver LED PWM I2C - MOD-23
Controller equipped with 16 PWM channels to control e.g. LEDs. It is connected to the main microcontroller via a two-wire I2C interface. The module is powered from 2.3 V to 5.5...
Index: MOD-02837
Index: MOD-02837
- EOL
Xmega eXploreE5 with ATXmega32E5 - MOD-26
The ATXmega32E5 AVR ATXmega32E5 energy-saving 32 biotech microcontroller, which, in addition to the standard digital outputs, has a 16-channel A/C and D/A converter with 2...
Index: MOD-02839
Index: MOD-02839
- EOL
Power supply module with built-in switch. Provides 3.3 V and 5 V with a current capacity of 500 mA. It is powered up to 12 V, connected to a 5.5 x 2.1 mm or 5 V DC socket from...
Index: MOD-02838
Index: MOD-02838
- EOL
3-channel RC5 receiver / remote control switch - MOD-09
A module for remote control using any infrared remote control with RC5 code. The receiver has 3 channels, which can be freely programmed.
Index: MOD-02968
Index: MOD-02968
- EOL
Monaural touch button AT42QT1011 - MOD-25
Circuit with monostable touch button AT42QT1011 integrated in the PCB mosaic. When the touch is detected, the OUT output goes to a low state. The module is powered from 1.8 V...
Index: MOD-02971
Index: MOD-02971
- EOL
Executive module with relay and microcontroller ATmega8 MOD-34
Module equipped with ATmega8 chip. Enables remote switching on and off circuits that operate with a current or voltage other than that used by the control system.
Index: MOD-03673
Index: MOD-03673
- EOL
Logic level converter two-way, 8-channel MOD-38
The module based on the TXB0108 chip allows for communication between systems using the most popular voltage levels: 3.3 V and 5 V. It has eight channels, automatically detects...
Index: MOD-03675
Index: MOD-03675
- EOL
Touch sensor 5-point AT42QT1070 MOD-46
Module equipped with capacitive touch sensor AT42QT1070 . Enables operation of 5 touch fields.
Index: MOD-03676
Index: MOD-03676
- EOL
7-point touch sensor AT42QT1070 MOD-42
Module equipped with capacitive touch sensor AT42QT1070 . Enables operation of 7 touch fields.
Index: MOD-03677
Index: MOD-03677
- EOL
Temperature sensorTMP36GT9Z - analog - MOD-37
Module equipped with TMP36GT9Z sensor. It enables temperature measurement in the range from -40°C to +125°C with resolution of 0.5°C . Supply voltage is from 2.7 V to 5.5 V.
Index: MOD-03678
Index: MOD-03678
- EOL
Temperature sensors LM35DZ - analog - MOD-47 module
Module equipped with an LM35DZ sensor. It enables temperature measurement from 0 °C to +100 °C with a resolution of 0.5 °C. Supply voltage is 2.7 V to 5.5 V.
Index: MOD-03679
Index: MOD-03679
- EOL
Temperature sensors DS18B20 - digital 1-wire - MOD-31 module
Module equipped with DS18B20 sensor. It enables temperature measurement from -55 °C to +125 °C with maximum accuracy of 0.5 °C. Supply voltage is 3.0 V to 5.5 V.
Index: MOD-03680
Index: MOD-03680
- EOL
RTC Module PCF8563 I2C - real time clock - MOD-48
Module equipped with a PCF8563 chip. Enables precise and independent timing. The operating voltage ranges from 1.0 V to 5.5 V. The power supply is supported by a CR1220...
Index: MOD-03681
Index: MOD-03681
- EOL
I2C/1-Wire converter 8xRJ45 - MOD-35
The module allows for the connection of 8 1-Wire circuits via the I2C interface. It has two sets of 4 x RJ45 connectors for connecting devices.
Index: MOD-04837
Index: MOD-04837
- EOL
MCP4725 - D/A converter, 12-bit DAC, MOD-53
The transmitter allows the generation of an analogue signal, e.g. sinusoidal signal by means of a digital signal using the I2C bus. It works with voltages from 2.7 V to 5.0 V.
Index: MOD-05395
Index: MOD-05395
- EOL
EEPROM 32kb I2C memory - AT24C32D - MOD-50
The chip allows to increase the EEPROM memory of the microcontroller by additional 32 kb. The AT24C32D memory is divided into 4096 8-bit blocks. It communicates with the...
Index: MOD-05397
Index: MOD-05397
- EOL
Explore DuoNect - stand for MQ gas sensor with potentiometer - MOD-72
Adapter for MQ-series gas sensor with built-in potentiometer for analog signal calibration.
Index: MOD-05399
Index: MOD-05399
- EOL
Modulogy: modern electronic modules and extensions
Modulogy is a young, dynamically developing Polish brand based in Warsaw. The company mainly deals with the creation of expansion modules and development kits compatible with popular hardware platforms, such as Arduino or Raspberry Pi. Modulogy products and solutions are designed for designing, prototyping and building electronic devices, thanks to which they will be perfect as a work aid for electronics, IT specialists, robotics and IoT specialists, as well as supporting learning in each of these fields. Users praise Modulogy products for reliable operation, careful workmanship and simple operation, as well as high durability and resistance to mechanical damage.
Modulogy brand offer
Modulogy's offer includes a huge selection of extensions and electronic modules that work with the most popular hardware platforms - including Arduino, Raspberry Pi, Intel Edison, STM32 Nucleo, Atmel Xplained, TI LaunchPad and Freescale Freedom. The range includes IoT extensions, wireless communication modules, pin expanders, converters and interfaces, motor and servo drivers, LED controllers, adapters, sensors (temperature, humidity, touch, light, color, magnetic etc.), clocks, memory modules, card readers memories, displays, digital and analog circuits and many others. Modulogy extensions can be used both at the prototyping stage and for the construction of utility electronic devices or working robots. They are also perfect for IoT projects, creating building automation or improving and expanding electronic equipment.
What Modulogy products can you find in Botland?
In our assortment you will find a very wide selection of products created by the Modulogy brand. Our offer includes logic level converters, extensions with microcontrollers, memory card readers, encoders, logic testers, potentiometers, buttons, LED drivers, power modules, RC receivers, executive modules, touch sensors, temperature sensors, RTC real-time clock modules , analog-to-digital and digital-to-analog converters, EEPROM memories, accelerometers, stepper motor drivers, wireless communication modules, GPS modules, PWM generators, temperature and humidity sensors and many other products, including extensions for Raspberry Pi, STM32 Nucleo or Arduino. We only offer original products from Modulogy, so you can be sure that when you buy from us, you are choosing reliable solutions of the highest quality.