- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
A knob in the form of an encoder together with a button, allows to create a simple user interface. When turning, the system sends a high state to the S2 or S3 output, depending on the direction. The rotation is indicated by twoLEDs.The resolution of the encoder used is 20 pulses per revolution.
There is anATtiny13microcontroller on the board, which enables direct operation of the device. The AVR can also be programmed independently usinga suitable programmer.
Downloads
| Pin | Description |
|---|---|
| +V | Supply voltage from 2.7 V to 5.0 V. |
| GND | The weight of the system. |
| S1A, S1B | Push-button connectors built into the pulser axis. |
| S2, S4 | Right/left turn signals. |
Specification
- Supply voltage: 2.7 V to 5.0 V
- Built-in microcontroller: AVR ATtiny13
- Connectors: 6-pin raster 2.54 mm for self-soldering
- LED indication
- Configurable jumper reference voltage selection for the button
- Built-in power filtering capacitors
- Dimensions: 22 x 19 mm
- Module manufactured in Poland
Included:
- Switchmodule
- Soldering kit for self-soldering goldpin 6 pin strip
Useful links |
