- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
The module allows you to create projects based on the AVR ATmega328P microcontroller.The board has a 16 MHz quartz resonator and a button to reset the circuit. Built-in 3.3V stabilizer allows to power other circuits.
The circuit has connectors matched to the contact board (2.54 mm raster)3 on which the pins of the main microcontroller have been successively led. The ISP socket enables quick and convenient connection ofthe AVR programmer.After uploading the bootloader and usingUSB-UART adapter, the chip can be programmed directly from Arduino IDE environment.
Specification .
- Supply voltage: 4.5 V to 5.0 V
- Microcontroller: ATmega328P
- Flash memory: 32 kB
- SRAM: 2 kB
- EEPROM memory: 1 kB
- Clock: 16 MHz
- Number of I/O outputs: 23
- Number of PWM channels: 6
- Built-in analogue-to-digital converter: 6 channels
- Clock frequency: 16 MHz
- Built-in voltage regulator: LM1117 3.3 V
- 3.3 V output to supply other modules
- Possibility of programming through Arduino IDE environment using USB-UART converter
- A/C converter reference voltage can be selected with a jumper
- Built-in RESET button
- Microcontroller pins for copatable connectors with contact plate - goldpin raster 2.54 mm
- Online instructions
- Module manufactured in Poland
Included:
- Module with ATmega328P with protection
- Soldering kit 2 x goldpin 14 pin strip
Useful links |
