Product description: Polymaker PolyLite PLA Pro filament 1.75 mm 1 kg - Army Green
PolyLite PLA Pro is a green 3D filament from Polymarker , wound on a spool, weighs 1 kg and has a diameter of 1.75 mm . It combines the properties of PolyLite PLA and PolyMax PLA. The material is distinguished not only by its exceptional impact resistance, but also by its increased strength and stiffness . At the same time, it retains all the excellent technical properties of traditional PLA . Additionally, it allows you to obtain silky smooth surfaces, ideal for creating high-quality 3D prints. It can be used for engineering applications, e.g. for printing devices, prototyping. It uses innovative Jam-Free technology, which eliminates the risk of jamming during printing. The product is hermetically packed with a moisture absorber.
Polymaker brand filament for engineering applications.
PLA Pro Filament Properties
- High aesthetics of the print surface
- Excellent technical properties
- Low melting point
- Easy to print
- Highly impact resistant
- Durable and very stiff
Application of PLA Pro filament
- Gadgets - pendants, key rings
- Decorations
- Toys
- Personalised gifts
- Instruments
- Prototyping
Jam-Free Technology
Polymaker has developed Jam-Free technology for PLA filament, which increases the material’s heat resistance from 60°C to 140°C. This is to prevent any thermal creep issues that can cause jams and print irregularities.
Heat Creep is the process of heat moving up the hotend , causing the filament to melt too early.
Suggested Filament Printing Parameters
| Printing temperature | From 190°C to 220°C |
| Table temperature | From 30°C to 60°C |
| Cooling | Recommended |
Due to differences in printer designs, the above data should be treated as guidelines and the appropriate values should be determined experimentally.
| Technical specifications of the filament from Polymaker | |
|---|---|
| Filament type | PLA Pro |
| Color | Army Green |
| Filament diameter | 1.75mm |
| Print speed | From 30mm/s to 70mm/s |
| Thermal resistance | 59.3°C |
| Density | 1.22 g/ cm3 |
| Spool | Standard |
| Spool dimensions | 200 x 65.6mm |
| Mass | 1kg |
