List of products by brand SparkFun - Strona 3
Particle Sensor Breakout - MAX30101 - SparkFun SEN-16474
The sensor is based on a system MAX30101 and allows for the determination of the distance, pulse, smoke, and even blinking of an eye. It has 3 LEDs and a very responsive...SP485 - UART converter - RS485 - SparkFun BOB-10124
The module converts signals transmitted on the serial UART interface (RX, TX) in the range of the RS485 Protocol that allows you to connect up to 32 devices on one line up to 1...Stepper Motor 42BYGHM809 400 steps 3V 1,7A 0,48Nm - SparkFun ROB-10846
Bipolar stepper motor, four-wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 3 V and draws 1.7 A per coil. Holding torque is 4.89 kg*cm...Ampgenol FCI Clincher connector - female 3x - SparkFun COM-14197
Connectors can be used to close thin, flexible FFC cables.EeonTex Conductive Fabric - rigid - SparkFun COM-14110
EeonTex is a durable, conductive fabric. Its resistivity is from 8 Ω / m2 to 108 Ω / m2. Tensile strength is not more than 450 N, the tear resistance is maximally 12 N. The...Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....Adapter SSOP to DIP 16-pin - 2pcs - SparkFun BOB-13994
Adapter enables the connection of the chips in SMD SSOP 20 cases to threaded output holes of DIP 16 pin. It also allows you to connect circuits to a breadboard or connect with...TMP102 - I2C temperature sensor - SparkFun SEN-13314
Module with digital TMP102 thermometer in the range from -40 °C to 125 °C, equipped with I2C interface (TWI). The supply voltage ranges from 1.4 V to 3.6 V.Sound detector - microphone with connectors - SparkFun SEN-14262
Audio detector with power voltage range from 3.5 to 5.5 V. The module is easy to use, it has three outputs: analog - to measure the intensity of the signal, digital is...Moto:bit motor controller - extension for BBC micro:bit - Qwiic - SparkFun DEV-15713
Expansion board for module Micro:bit. It has a built-in dual driver of motors, I2C port, Qwiic connector, pins for servos, power management and built-in power connector DC....- On sale!
- Promotion
Thumb joystick stand - SparkFun BOB-09110
Stand in the form of PCB to facilitate connection of the joystick from the SparkFun.Thermal imaging camera - FLiR Lepton Dev Kit V2 - SparkFun KIT-15948
A set containing the Flir Lepton V2 thermal imaging camera , and a board to facilitate its connection. The Lepton LWIR radiometric module used in the device has a resolution...- On sale!
- Promotion
Load Sensor Combinator (Ver. 1.1) - SparkFun BOB-13878
The module allows you to connect 4 load sensors - strain-gauge beams to one of the bridge via 4-wire cable. It finds application, for example, in the construction of the...Panel for 4x4 keyboard - compatible with LED diodes - SparkFun COM-07835
Keyboard overlay with 4x4 - 16 keys. Under each key, an LED can be mounted in a 3 or 5 mm threaded housing. This allows you to create a backlit key panel.Connector for LED strips and strips JST-SM (4-pin) - SparkFun CAB-14576
Connector connecting RGB LED strips. The package contains a plug and socket JST-SM (4-pin) . Each end is plugged into 10 cm 20AWG cable.Male adapter RP-SMA - U.FL - 15cm - SparkFun WRL-18569
Adapters for connectors of 2.4 GHz U. FL RP-SMA (male) antennas with the length of 15 cm.TEMT6000 - analog light intensity sensor module - SparkFun BOB-08688
An analog sensor measures the ambient light intensity. It works just like a regular transistor - the greater the intensity of the incident light, the higher the output voltage....Triple Axis Accelerometer Breakout - LIS3DH - SparkFun SEN-13963
Sensor LIS3DH is a 3-axis digital accelerometer. It allows you to measure acceleration in the configurable ranges. It communicates via the I2C or SPI bus, it is powered from a...Humidity and Temperature Sensor Breakout - Si7021 - SparkFun SEN-13763
Humidity and temperature sensor powered by the voltage from 1.9 V to 3.6 V with I2C interface. The measurement of temperature is from -10°C to 85°C, humidity from 0 to 80% RH.Arcade Concave Button 3,5cm - white - SparkFun COM-09340
Dished button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.SX1509 - GPIO expander 16 I/O for Arduino - SparkFun BOB-13601
Expansion board with 16 GPIO pins together with I2C interface what means that to fully use all pins you only need to connect two wires to the microcontroller. SX1509 has also...GSM antenna - quad-band - SMA - Sparkfun - CEL-00675
Quad antenna operating in the GSM band, it has a male SMA connector. It works in the frequencies ranging from 850 MHz to 1900 MHz. Length is 57.4 mm.Set of female connectors extended for Arduino Mega i Pro - SparkFun PRT-10007
Strap designed for Arduino Pro Mega. Mounted in a cascade extends the connectors placed on modules. The kit includes four straps: 2 x 8-pin and 2 x 6-pin.Heart rate monitor - SparkFun SEN-11574
Module for measuring the human heart rate, compatible with Arduino. It is working with the voltage from 3 V to 5 V, the output is the analog signal. The kit includes a probe...