Monochrome graphical OLED display 0,96 '' 128x64px - I2C/SPI - Adafruit 326

Index: ADA-02624 EAN: 5904422353902

Small monochrome OLED-display with a diagonal of 0.96" and a resolution of 128 x 64. Characterized by high contrast. The device works with voltages of 3.3 V and 5 V, communicates via SPI or I2C.

Monochrome graphical OLED display 0,96 '' 128x64px - I2C/SPI - Adafruit 326
€25.00
€20.33 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino Raspberry Pi

Description: Monochrome graphical OLED display 0.96 '' 128x64px - I2C / SPI - Adafruit

Mini OLED display with a resolution of 128 x 64, with a diagonal of 0.96 inches. It is supplied with the voltage of 3.3 V. It operates with voltages of 3.3 V and 5 V, communicates through the SPI bus or I2C. The device is characterized by a high contrast, each of the white pixels is supplied separately by the control system and shines with its own light.

The product is compatible with Arduino and Raspberry Pi

The manufacturer has preparedthe manualandlibrary forArduino.

In the system Adafruit you can also findan example of a connection with the Raspberry Pi.

Connection

The display can be powered with any voltage from 3.0 V to 5.0 V. The data lines operate with a supply voltage from 3.3 V to 5.0 V. You can choose the I2C bus or SPI for communication.

 

In order to run the I2C it is necessary to close jumper SJ1, SJ2, located on the back of the board. The SPI bus is working by default. A detailed description can be found onthe website of the manufacturer.

Wyświetlacz OLED monochromatyczny

Pin Description
GND The ground of the system.
3.3 V The output from the voltage regulator is 3.3 V.
VIN Supply voltage from 3 V to 5 V.
DATE Data line of SDA of the I2C bus. Data line of SPI bus.
CLK Line clock bus of SCL I2C. Line clock of SPI bus.
SA0/ DC Change of address of the I2C bus. The data line of the SPI bus
RST Reset the module.
CS Device selection Chip Select of the SPI bus.

 

Specification of Monochrome graphical OLED display

  • Supply voltage: from 3.0 V to 5.0 V
  • Communication: I2C or SPI
  • The address of the I2C bus: optional: 0x3C - 0x3D
  • Connectors: hole for goldpin connectors - 2.54 mm raster (included)
  • The dimensions of the board: 38 x 29 mm
  • Weight: 8.5 g

 

Screen - type OLED
Screen - diagonal 0,96"
Screen - interface SPI+I2C
Screen - touch no
Screen - resolution 128x64px
Package width 10.5 cm
Package height 4.5 cm
Package depth 2 cm
Package weight 0.008 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: