Product description: Set for learning programming with Raspberry Pi Pico W
The kit contains elements for completing lessons from the Raspberry Pi Pico programming course, which is available on the Botland blog. It allows you to deepen your knowledge of how peripheral devices work, as well as acquire programming skills in C through practical projects. The materials available there will allow you to learn about the unique world of programming in a slightly different way than usual. In addition to the practical aspects of the C language , which you will practice on real projects, you will also learn interesting facts from the technology industry and learn to independently solve problems and detect errors , which are the everyday life of every programmer. Moreover, the set contains elements that you can use in the future to implement your own ideas.
The elements included in the set are: the Raspberry Pi Pico W module, a breadboard, three types of connection cables, LEDs, a set of resistors, buttons, photoresistors, a digital light sensor, a digital temperature, humidity and pressure sensor, an OLED display and a USB cable -microUSB. They will allow you to prepare projects that will help you learn the basic issues of the C language and programming principles.
Set with Raspberry Pi Pico W.We have prepared a course especially for you, which will be published in installments:
Raspberry Pi Pico W
Raspberry Pi Pico W is a compact module equipped with a specially designed Raspberry RP2040 microcontroller. The RP2040 microcontroller is a dual-core A RM Cortex M0+ chip with a frequency of 133 MHz, containing 264 kB of SRAM and 2 MB of Flash memory. The module offers 2.4 GHz WiFi IEEE 802.11 b/g/n wireless communication via the CYW43439 chip. The Raspberry Pi Pico W board has 26 GPIO pins operating at 3.3 V and a built-in temperature sensor. Raspberry Pi Pico is programmed in C/C++ or MicroPython via the microUSB connector.
The set includes:
| No | Photo | Description |
|---|---|---|
| 1 |  |
Raspberry Pi Pico W - module based on the RP2040 system, equipped with 26 I/O pins and a 2.4 GHz WiFi wireless communication system - CYW43439. The module has soldered male goldpin connectors. |
| 2 |  |
JustPi 830-pole breadboard - a large board with separate power lines enabling the creation of electronic circuits. |
| 3 |  |
Set of 5 mm justPi LEDs (30 pcs) - 10 red, green and yellow diodes each. |
| 4 |  |
Set of justPi resistors (200 pcs) - 20 pcs of the most popular values, enabling e.g. connection of LEDs. |
| 5 |  |
Set of justPi connecting cables - male-male 20 cm, 40 pcs. - they allow you to connect peripheral devices with Raspberry Pi Pico W. |
| 6 |  |
Photoresistor - a sensor that allows you to measure the intensity of incident light, allowing you to detect, for example, whether it is dark or light in the room. |
| 7 |  |
OLED blue graphic display 0.96" I2C - using it you can create a simple graphic interface. |
| 8 |  |
Tact-switch buttons - will serve as an element for entering data into the module. |
| 9 |  |
MicroUSB cable, 1.8 m long - used to connect Raspberry Pi Pico W with a computer. |
| 10 |  |
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C - allows you to measure ambient brightness in the range from 0 lx to 120 klx. |
| 11 |  |
DFRobot Gravity - BME280 humidity, temperature and pressure sensor - multifunctional environmental conditions sensor, making measurements in the ranges: from -40°C to 85°C, from 0% to 100% RH, from 300 hPa to 1100 hPa. |
| 12 |  |
DFRobot Gravity - set of I2C/UART connection cables - PH2.0 - male - 30 cm - 5 pcs. |
| 13 |  |
An organizer that makes it easier to carry the set. |
