- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Royal Resin Crystal PRO 1 kg epoxy resin - casting - colourless
Royal Resin brand epoxyresin, does not contain solvents. Very good venting, has a small temperature rise at the moment of setting. The resin is crystalline, colourless, intended mainly for transparent casts without adding colour. It is suitable for making high casts, even up to 10 cm per cast. Product consists of two packages. Component A (resin) with a net weight of 769 g and Component B (hardener) with a net weight of 231 g. Full cure is achieved after 168 hours. After setting it is very hard and strong, waterproof and absolutely adheres to most surfaces.
Directions for use
Read the instructions for use included in the kit. The optimum working temperature with Crystal PRO is 24°C.
Pour component B into component A in appropriate proportions and mix thoroughly. After mixing, the material can be immediately spread until a uniform layer is obtained.
Royal Resin Crystal PRO epoxy resin 1 kg.
Caution!
Do not measure out components by volume. Only B to A weight proportion guarantees proper product performance.
Special care should be taken while working with the resin due to the chemical properties of the substance.
Components included.
Main features of Epoxy Resin Crystal PRO:
- UV stable - no yellowing
- Mix ratio is 100:30
- Optically clear, transparent
- Very low viscosity
- Odourless, does not contain solvents
- Long working time: 30 to 90 min
- Curing time: up to 30 hours (fully cured after 7 days (168 hours))
- Low temperature rise
- Quick and easy to vent
- Very easy to use and handle
- Minimal shrinkage
- Single layer can be thick and still transparent (up to 10 cm)
- Very durable and strong after curing
- Waterproof
- Resistant to most chemicals
- Absolute adhesion to most substrates
- Non-dusty
- Self-levelling
Contents of the kit
- Royal Resin Crystal PRO 1 kg epoxy resin
- 2 x 200 ml cup
- 1 x 10 ml syringe
The resin can be combined with additional ingredients, such as epoxy resin dyes, to obtain any color. In our offer you will also find transparent and pearl dyes in various colours. We encourage you to familiarize yourself with our range.
| Resin technical specification | |
|---|---|
| Colour | Clear |
| Shelf life of resin | 12 months from date of production |
| Mixing ratio | 100:30 (e.g. 100 g resin : 30 g hardener) |
| Working time | 30 min to 90 min |
| Curing time | Up to 30 hours; fully cured after 168 hours |
| Shrinkage value | Minimum |
| Recommended thickness of a single layer | Up to 10 cm |
| Mass | 1 kg |
Useful links |
