Sensors odbiciowe - Strona 2
Cytron Maker Line -Trim with reflective sensors
The Cytron module equipped with 5 reflective sensors (pair : IR diode and phototransistor) is able to track 13 to 30 mm wide lines in white and black. The sensor has 2...QTR-8RC reflectance sensor array - digital - Pololu 961
Strap with eight reflective sensors with digital output. It is powered with the voltage of 5 V or 3.3 V.Trim with QTR-3A reflective sensors - analog - Pololu 2456
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.Reflectance sensor KTIR0711S - with connectors
Module with reflective sensor KTIR0711S powered with the voltage of up to 5 V. It is characterized by small dimensions: 9 x 14 mm. It has soldered goldpin connectors.Strip with reflective sensors QTR-HD-05RC - 5-channel - digital - Pololu 4105
Compact strap with five reflective sensors with the size of 21 x 20 mm. It has digital outputs, is powered with the voltage from 2.9 V to 5.5 V and allows for the adjustment of...Distance sensor, reflective 3,3V/5V - Iduino ST1140
The module is equipped with IR reflective sensor equipped with digital output. It works with a supply voltage from 3.3 V to 5 V. It is applied in the robots tracking the line.2mm slit sensor - Iduino SE056
Digital module with optical sensor with a slit of 2 mm. The output is a digital signal. The supply voltage is 5 V. With the encoder's shield, it can be used as a device...Distance sensor, reflective - receiver + transmiter IR - 3.3V / 5V - 40cm - Iduino ST1081
The reflective module with a transmitter and an infrared receiver, equipped with a digital output. It works with a voltage from 3.3 V to 5 V. It enables the detection of...Zumo - strip with reflective sensors - Pololu 1419
Strip with six reflective sensors for educational Zumo robot. It allows you to find the edge of the ring, it also adds a line following capabilities to the robot.QTR-1A reflectance sensor - 2pcs. - Pololu 2458
Two modules with QTR reflective sensors. They have an analog output. The supply voltage is 5 V.Photo Interrupter Sensor, Speed Measuring - Waveshare 12225
Digital module with optical sensor, with a gap of 6 mm. The module has a built-in comparator, because of this, the output is a digital signal. Supply voltage is from 3.3 V to 5...RedBot - line sensor (line follower) - SparkFun SEN-11769
Addition to the RedBot Kit extending the robot with the ability to detect the line. The sensor detects light reflected from the surface and on its basis determines the color of...- Discontinued product
- SPECIAL OFFERS
See also
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
- Gravity modules
