- Reduced price
Product description: WizFi360-EVB-Pico - board with RP2040 microcontroller and WiFi communication - WIZnet
Module manufactured by WIZnet , equipped with Raspberry Pi RP2040 microcontroller - dual-core ARM Cortex M0+ clocked at 133 MHz , with 264 kB of RAM and external Flash Quad-SPI memory with eXecute In Place (XIP). The manufacturer also used the WizFi360-PA system, which extends the functionality of the board with wireless WiFi communication - it provides a wireless 2.4 GHz band and is compatible with 802.11 b/g/n standards and supports SoftAP , Station and SoftAP+Station modes. The module also includes a microUSB connector (type B) for power and programming, and a 3-pin ARM serial debug (SWD) port. WizFi360-EVB-Pico is used as an actuator in IoT solutions.
WizFi360-EVB-Pico - board with RP2040 microcontroller and WiFi communication - WIZnet.
The board has as many as 40 leads.
Special features of the plate
- Raspberry Pi RP2040 microcontroller and WiFi wireless communication system
- Support Station / SoftAP / SoftAP+Station operating modes
- Data pass-through and AT command data transfer support
- Support AT serial command configuration
- Support TCP Server / TCP Client / UDP working mode
- Support operation channel configuration from 0 to 13
- Support 20MHz/40MHz auto bandwidth
- Supports WPA_PSK / WPA2_PSK encryption
- Support built-in unique MAC address and user configurable address
Technical specification of the RP2040 chip
- Dual-core ARM Cortex M0+ clocked at 133 MHz
- 264 kB onboard SRAM
- External Quad-SPI Flash with eXecute In Place (XIP)
- 12-bit analog-to-digital converter (ADC) 500 fps
- Communication interfaces: 2x UART, 2x I2C, 2x SPI, 16x PWM channels
- SWD interface for debugging
- 1x timer with 4 alarms, 1x RTC real time counter
- Supported programming languages: C/C++ and MicroPython
The manufacturer has also prepared a detailed user's guide , which contains a description of individual pins and necessary programming tips - check it out!
Description of the module pins. For more information on the individual pins, see the user's guide .
Components included in the set.
Technical specification of the WizFi360-PA system
- Wireless communication type: WiFi
- Band: 2.4GHz
- Supported standard: 802.11 b/g/n
- Serial port baud rate: 600 bps to 2 Mbps with 16 common values
- Support up to 5 TCP/UDP connections
- Obtaining an IP address automatically from a DHCP server (station mode)
- DHCP service for wireless LAN clients (AP mode)
- DNS support for communication with servers by domain name
- "Keep-Alive" support for TCP connection monitoring
- "Ping" support to monitor network status
- Supports firmware update via UART Download / OTA (via WLAN)
Kit contents
- WizFi360-EVB-Pico - board with RP2040 microcontroller and WiFi communication - WIZnet - 1 piece
- Goldpin strip - raster 2.54 mm - 2 pieces
