Two-color graphical OLED display 0.96'' (B) 128x64px SPI/I2C - straight connectors - Waveshare 9092

Index: WSR-04437 EAN: 5904422371944

OLED-display with a diagonal of 0.96 " and a resolution of 128 x 64 px with colors: yellow and blue. The screen is based on the SSD1306 controller, it works with voltages of 3.3 V and 5 V, it communicates via SPI or I2C. It has soldered, simple goldpin connectors.

Two-color graphical OLED display 0.96'' (B) 128x64px SPI/I2C - straight connectors - Waveshare 9092
€7.90
€6.42 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Waveshare
Compatibility: Arduino

Description

OLED-display with a diagonal of 0.96 " and a resolution of 128 x 64 px with colors: yellow and blue. The screen is based on the SSD1306 controller, it works with voltages of 3.3 V and 5 V, it communicates via SPI or I2C.

 

This version has soldered simple goldpin connectors, in our offer, you will also finda display with angle pins.

 

The manufacturer provides auser manualandlibrary to support the screen.

 

Connection

The module has soldered simple goldpin connectors - pitch of 2.54 mm, it communicates via SPI or I2C. Description of the specific leads are in the table.

 

Pin Symbol Description
1 VCC Supply voltage from 3.3 V to 5.0 V.
2 GND The ground of the system.
3 NC Should be left unconnected.
4 DIN Line data of the communication interface SPI / I2C.
5 CLK Clock line of the communication interface SPI / I2C.
6 CS Selection of the device of the SPI bus is activated by the low state.
7 D/C The choice of operating mode - low state means the transmission of commands, high - of data.
8 RES The reset of the system is activated by the low state.

 

 

Setting

The choice of communication bus is performed the BS0 and BS1 pins, which are on the back of the board. By default, the display works in 4-wire SPImode. To make the changes, necessary is the soldering, which leads to loss of warranty. For details, see the table below.

 

Work

mode

Pin

BS0

Pin

BS1

DIN

function

CCS

function

3-wire SPI 1 0 MOSI SCLK
4-wire SPI 0 0
I2C 0 1 SDA SC

 

Jumper for selection of operation mode is located in the centre of the module: BS1 and BS0.

 

Specification

  • Working voltage: from 3.3 V to 5.0 V
  • Driver: SSD1306 (documentation)
  • Communication: SPI / I2C
  • Mode selection using jumper BS0 and BS1
  • Display type: OLED
  • Diagonal: 0,96"
  • Resolution: 128 x 64 px
  • Color: yellow and blue
  • The viewing angle: above 160 °
  • Operating temperature: -20 °C to 70 °C
  • Soldered goldpin connectors - 2.54 mm pitch
  • Dimensions: 33.5 x 33 mm

 

Screen - type OLED
Screen - diagonal 0,96"
Screen - interface SPI+I2C
Screen - touch no
Screen - resolution 128x64px
Test 4
Package width 6 cm
Package height 9 cm
Package depth 2 cm
Package weight 0.007 kg

Be the first to ask a question about this product!

Product reviews

Two-color graphical OLED display 0.96'' (B) 128x64px SPI/I2C - straight connectors - Waveshare 9092

5/5

Average grade

4

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Jörg 26.01.2023 Confirmed purchase Translated review
Inexpensive small display for energy-saving applications.
Zdzisław 08.01.2023 Confirmed purchase Translated review
Everything's fine
Dawid W. 26.05.2022 Confirmed purchase Translated review
It's ok . It fulfills its function
Magdalena 08.03.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: