Description
OLED-display with a diagonal of 0.96 " and a resolution of 128 x 64 px with colors: yellow and blue. The screen is based on the SSD1306 controller, it works with voltages of 3.3 V and 5 V, it communicates via SPI or I2C.
This version has soldered simple goldpin connectors, in our offer, you will also finda display with angle pins.
|
The manufacturer provides auser manualandlibrary to support the screen. |
Connection
The module has soldered simple goldpin connectors - pitch of 2.54 mm, it communicates via SPI or I2C. Description of the specific leads are in the table.
| Pin | Symbol | Description |
|---|---|---|
| 1 | VCC | Supply voltage from 3.3 V to 5.0 V. |
| 2 | GND | The ground of the system. |
| 3 | NC | Should be left unconnected. |
| 4 | DIN | Line data of the communication interface SPI / I2C. |
| 5 | CLK | Clock line of the communication interface SPI / I2C. |
| 6 | CS | Selection of the device of the SPI bus is activated by the low state. |
| 7 | D/C | The choice of operating mode - low state means the transmission of commands, high - of data. |
| 8 | RES | The reset of the system is activated by the low state. |
Setting
The choice of communication bus is performed the BS0 and BS1 pins, which are on the back of the board. By default, the display works in 4-wire SPImode. To make the changes, necessary is the soldering, which leads to loss of warranty. For details, see the table below.
|
Work mode |
Pin BS0 |
Pin BS1 |
DIN function |
CCS function |
|---|---|---|---|---|
| 3-wire SPI | 1 | 0 | MOSI | SCLK |
| 4-wire SPI | 0 | 0 | ||
| I2C | 0 | 1 | SDA | SC |
Jumper for selection of operation mode is located in the centre of the module: BS1 and BS0.
Specification
- Working voltage: from 3.3 V to 5.0 V
- Driver: SSD1306 (documentation)
- Communication: SPI / I2C
- Mode selection using jumper BS0 and BS1
- Display type: OLED
- Diagonal: 0,96"
- Resolution: 128 x 64 px
- Color: yellow and blue
- The viewing angle: above 160 °
- Operating temperature: -20 °C to 70 °C
- Soldered goldpin connectors - 2.54 mm pitch
- Dimensions: 33.5 x 33 mm
Useful links |
