- Reduced price
- Promotion
- Reduced price
- Promotion
GJ-C2725-650 M12 2,7mm 15Mpx lens - for Raspberry Pi camera
Index: RPI-22484
- Reduced price
- Promotion
SENSORS - Strona 49
Loading...
Temperature sensor - thermistor NTC-MF52 - Iduino ST1147
Module with temperature sensor equipped with a thermistor NTC-MF52. In order to read values from the sensor, connect it to the analog signal of the microcontroller. It detects...
Index: OST-14322
Index: OST-14322
Aluminum, lightweight (1.3 g) mounts for Sharp distance sensors GP2Y0A02, GP2Y0A21 and GP2Y0A41. Mounts are equipped with mounting holes for M3 screws. Price includes set of 2...
Index: PLL-07985
Index: PLL-07985
Grove - water level sensor - 10cm - Seeedstudio 101020635
Sensor to measure the water level in a vessel up to 10 cm using the Arduino module. The measurement is made by volume . The tile is equipped with a Grove connector, for...
Index: SEE-16346
Index: SEE-16346
Grove - TSL2561 - digital I2C ambient light sensor
Module from Grove with a digital sensor measuring the light intensity of the environment. It has a linear spectral response in the visible light range to the human eye. The...
Index: SEE-11303
Index: SEE-11303
Waterproof probe with temperature sensor DS18B20 - Okystar - 20m
Waterproof probe with DS18B20 digital sensor. It is powered from 3 V to 5.5 V . The sensor allows to measure temperature of places distant, difficult to reach from the...
Index: OKY-15864
Index: OKY-15864
Slot sensor - optocoupler GP1A57HRJ00F - SparkFun SEN-09299
Sensor with an infrared emitter on one side and a screen infrared detector on the other. By emitting a beam of infrared light, it can detect when an object passes between the...
Index: SPF-11445
Index: SPF-11445
Tension beam YZC-1B (97) 40kg (400N)
Strain-gauge beam operating in the range of up to 40 kg (400 N approx.). It is applied, for example, for kitchen scales, portable scales. The connecting cable has tips with the...
Index: DNG-13170
Index: DNG-13170
Temperature sensor - thermistor NTC-MF52 with potentiometer - Iduino SE017
Module with temperature sensor equipped with a thermistor NTC-MF52. For control, used is an analogue or digital output. It detects the temperature in the range from -55°C to...
Index: OST-14291
Index: OST-14291
Grove - RS-06WD reflectance sensor v1.1
Module from the Grove is equipped with the reflective sensor RS-06WD. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied...
Index: SEE-11331
Index: SEE-11331
Touch button AT42QT1010 - SparkFun module SEN-12041
A module made by SparkFun with a capacitive touch button based on AT42QT1010 system. It is powered with the voltage in the range from 1.8 V to 5 V. It has a digital output...
Index: SPF-03291
Index: SPF-03291
IR receiver + wire - Iduino SE027
Simple Iduino module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage of 5 V. It detects a beam at an angle of 90°. Maximum...
Index: OST-14283
Index: OST-14283
DFRobot Gravity - analogue meter of the sound level
The sound level meter is compatible with Arduino. For measurements, it uses the circuit instrument and the microphone with a low noise level that allows to accurately measure...
Index: DFR-10832
Index: DFR-10832
Radiation meter for the detection of γ-, β- and X-ray radiation - Joy-it JT-RAD01
A Geiger counter allows you to detect gamma, beta and X-ray radiation in the environment around us. It is characterized by exceptionally simple operation, high measurement...
Index: SEG-23552
Index: SEG-23552
AM2301 temperature sensor for the Sonoff TH16 device
The temperature sensor designed to operate with Sonoff TH16 intelligent Wi-Fi controller. It enables to turn devices on / off by controlling the temperature or humidity.
Index: DNG-10160
Index: DNG-10160
Grove ESP8285 V2 - WiFi UART module
Grove Wi-Fi module based on a ESP8285 system with built-in TCP/IP and support AT commands. It supports the most popular protection, such as WEP, WPA/WPA2, TKIP, AES and WAPI....
Index: SEE-13241
Index: SEE-13241
Grove - LS06-S ambient light sensor v1.1
Module from the Grove series is equipped with a sensor LS06-S. The s ensor allows to determine the intensity of the light and reflects the analog voltage signal back to...
Index: SEE-13335
Index: SEE-13335
Grove - heart rate sensor with a clip on the ear
Set for monitoring the heart rate, contains an ear clip with a wire and receiver module. The results can be displayed on the monitor through a serial port. The supply voltage...
Index: SEE-04409
Index: SEE-04409
Overlay for Raspberry Pi equipped with BME280 temperature, pressure and humidity sensor, LTR-559 light and proximity sensor, MICS6814 analog gas sensor, ADC ADS1015...
Index: PIM-17074
Index: PIM-17074
Aqara Temperature & Humidity Sensor T1 - white - WSDCGQ11LM
The Aqara temperature and humidity sensor is an intelligent device that monitors and records the temperature, humidity and atmospheric pressure in the room in real time. It...
Index: BNA-23678
Index: BNA-23678
Grove Creator Kit - Gamma - set of 40 Grove modules to Arduino
Set consisting of 40 modules and cables with Grove interface. It has been designed for creators of all ages, regardless of their level of sophistication and experience with...
Index: SEE-15410
Index: SEE-15410
Grove - vibration sensor with piezoelectric membrane
Vibration sensor with flexible plastic piezoelectric sensor LDT0-028. It is supplied with 5V, works with modules from Arduino, Raspberry Pi and other...
Index: SEE-11342
Index: SEE-11342
Digital temperature and humidity sensor DHT11 - Waveshare 9535
DTH11 digital temperature and humidity sensor module from Waveshare. It enables temperature measurement from 0°C to 50°C with measurement accuracy of ± 2°C and ambient...
Index: WSR-17383
Index: WSR-17383
Metal touch sensor module. The sensor detects the touch of the human body through a metal element. It has a digital and analog interface. Built-in potentiometer allows...
Index: OST-14277
Index: OST-14277
Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V - Pololu 3499
A pair of magnetic quadrature sensors, designed for installation in 20D motors from Pololu. It consists of a board with the Hall sensor and the plastic impeller with magnets,...
Index: PLL-08258
Index: PLL-08258