- New
- Reduced price
- Promotion
- On sale!
- Promotion
Switches and buttons - Strona 10
Loading...
Qwiic Power Switch - power switch - SparkFun PRT-26784
The Qwiic Power Switch from SparkFun allows you to more efficiently manage devices with Qwiic connectors. The switch module allows you to save power by selectively turning...
Index: SPF-25854
Index: SPF-25854
Tact Switch 6x6mm/13mm DIP - 5pcs.
A small monostable button mounted in a through-hole way - THT with two pins with the size: 6x6 mm, height: 13 mm. The price is for 5 pieces.
Index: SWT-00380
Index: SWT-00380
Big Push Button 10cm - blue - SparkFun COM-11274
Big button with an outer diameter of 10 cm with the built-in LED illuminating the dome.
Index: SPF-02252
Index: SPF-02252
Rotary switch 12-position / 1 circuit - 37mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 37 mm.
Index: UCC-06148
Index: UCC-06148
DFRobot Gravity - digital blue button
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-08045
Index: DFR-08045
Monostable array switch - PT-29G - 10A 440V NO 1
Table monostable NO switch with the load of contacts of 10 A for 440 V. The key is marked with "1".
Index: NSZ-09802
Index: NSZ-09802
Thumb Slide Joystick - SparkFun COM-09426
The analog, resistive joystick , differs from the others in that it has a sliding feel .
Index: SPF-09862
Index: SPF-09862
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red / green
A flat monostable switch with green/red backlight. Contact load is 2 A for 250 V.
Index: AKS-10803
Index: AKS-10803
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red
A flat monostable switch with the red backlight. Contact load is 2 A for 250 V.
Index: AKS-10804
Index: AKS-10804
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Monostable, flat switch with red point light. Contact load: 2 A for 250 V.
Index: AKS-10816
Index: AKS-10816
- Reduced price
- Promotion
Grove - Button - module with a button
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-11297
Index: SEE-11297
Lever switch ON-OFF 12V / 20A backlit - blue - Adafruit 3306
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a blue backlight.
Index: ADA-11416
Index: ADA-11416
Push button 10cm - yellow - flat
Big button with an outer diameter of 10 cm with a built-in yellow LED illuminating the dome.
Index: DNG-12668
Index: DNG-12668
Grove - push button with backlight - blue
Module from the Grove is equipped with a button with a blue LED. Powered with the v oltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...
Index: SEE-13660
Index: SEE-13660
Tuya LS3 - touch wall switch - ZigBee - 3-channels
Three-channel wall switch, touch. It allows you to control three light circuits. For proper operation of the switch you only need to connect a phase wire. The switch for...
Index: REM-16917
Index: REM-16917
- Reduced price
- Promotion
Big Push Button 10cm red - SparkFun COM-09181
Big button with an outer diameter of 10 cm, with built-in LED illuminating the dome.
Index: SPF-02174
Index: SPF-02174
Safety switch ON-OFF mushroom - 23mm
The "mushroom" safety switch with a loading capacity of contacts: 5 A for 250 V.
Index: NSZ-09799
Index: NSZ-09799
Self-adhesive membrane keypad - 1 "SOS" key
Membrane keyboard has one button labeled "SOS". On its back is the tape to facilitate mounting.
Index: MOD-09914
Index: MOD-09914
Arcade Concave Button 3,5cm - yellow - SparkFun COM-09338
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10080
Index: SPF-10080
Arcade Concave Button 3.5cm - black - SparkFun COM-09339
Dished button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10081
Index: SPF-10081
ON-OFF bistable switch - PBW-16APS - 2A 250V - flat red round
Flat bistable button with red illumination in the form of the ring. Contact load is up to 2 A for 250 V.
Index: AKS-10813
Index: AKS-10813
BleBox ProxiSwitch V2 - proximity switch 12-24V
Complete module allows you to turn the device on and off by touch or by gesture. It works with voltage from 12V to 24V and current efficiency up to 5A. It has...
Index: BOX-13725
Index: BOX-13725
Gravity - LED Switch 5x - set of 5x LED backlit buttons - various colors - DFRobot DFR0789
A set consisting of 5 buttons with backlight, for which a built-in LED is responsible. Each diode has a square cap which, when pressed, shines in a different color - red ,...
Index: DFR-21005
Index: DFR-21005
Gravity - RGB LED button - DFRobot DFR0991
Module with a button from DFRobot. Thanks to the built-in RGB LED, the button is illuminated in different colors . The module has a built-in Gravity connector with an I2C...
Index: DFR-22461
Index: DFR-22461
