Product description: 42SHDC1065Z-19WT 200 steps/rev 4.48 V / 0.8 A / 0.28 Nm for Flashforge Adventurer 3
The 42SHDC1065Z-19WT stepper motor of the x/y/z axis for the Flashforge Adventurer 3 printer is powered by 4,48 V. Current consumption per coil is 0,8 A. The motor torque is 2.85 kg*cm. The resolution is 200 steps per revolution (1.8°).
Stepper motor specifications
- Resolution: 200 steps/rotation (1.8°)
- Rated voltage: 4,48 V
- Current consumption: 0.8 A
- Torque: 2.85 kg*cm
- Shaft diameter: 5 mm
- Standard: NEMA 17
- Dimensions: 42 x 42 x 34 mm (without shaft)
Product description: Stepper motor 42SHDC1065Z-19WT 200 steps/rev 4,48 V / 0,8 A / 0,28 Nm for Flashforge Adventurer 3
We offer a high quality stepper motor that is designed to fit into the design of the Adventurer 3 3D printer from Flashforge. It is a device that is the key part that moves the extruder with high precision in the x/y/z axis.
The stepper motor achieves a resolution of 200 steps per revolution, which translates to an accuracy of 1.8°. Remember to take care of proper current parameters for the motor - only then it will be able to work properly. Nominally, the hardware uses 4.48V, while the current consumption per coil is 0.8A.
Performance of the 42SHDC1065Z-19WT stepper motor
The offered stepper motor is able to achieve a torque of 2.85 kg*cm - this means that the device is able to lift a weight of 2.85 kg suspended at a distance of 1 cm from the shaft.
It is also worth noting the fit of the equipment due to the dimensions - the length of the sides of the device is equal (42 mm x 42 mm), and the height is 34 mm without the shaft - its diameter is 5 mm.
