Orange Pi i96 ARM Cortex A5 32bit 256 MB RAM + 500 MB NAND Flash

Index: ORN-09994

Orange Pi mini-computer in i96 version with powerful 1.0 GHz RDA8810Psingle-core ARM Cortex-A5 processor. The board has a Vivante GC860 graphics module, 256 MB LPDDR2 RAM, 500 MB NAND Flash, WiFi, Bluetooth and a USB Host slot, 1 x USB OTG, 40 GPIO,microSD card slot. Works with Ubuntu, Android, Debian and Raspbian systems.

Orange Pi i96 ARM Cortex A5 32bit 256 MB RAM + 500 MB NAND Flash
€13.50
€10.98 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Orange Pi

Attention, the sale of the product is complete!

Orange Pi minicomputers have been withdrawn from sale due to the manufacturer's failure to provide appropriate certification. We encourage you to familiarize yourself withother devices available in our offer.

Description

Orange Pimini-computerin i96 version withpowerful1.0 GHzRDA8810Psingle-core ARM Cortex-A5processor.The board has a VivanteGC860 3D GPU, 256MBLPDDR2 RAM, 500 MB NANDFlash, WiFi,Bluetooth and a USB Hostslot, 1 x USB OTG, 40 GPIO,microSDcard slot. Works withUbuntu, Android, Debian and Raspbiansystems.

The device has 1 USB port, CSI, WiFi, Bluetooth and many more.

What do I need to run an Orange Pi minicomputer?

Additionalaccessoriesare also available in our shop.

Operating system

Orange Pi works with Ubuntu, Debian and Android systems and systems known from Raspberry Pi. The drive can be a microSD card up to 64 GB or built-in NAND Flash (jumper selection).

Systems can be downloaded fromthe manufacturer's website.

Installation of the system is very easy - checkour manual!

Orange Pi i96 - top view.

Communication

Orange Pi has basic communication interfaces, which can be found in PC-class office computers. In addition to the previously mentioned audio and video interfaces, the user has at his disposal:

  • one USB connector and one microUSB OTG socket,where you can connect e.g. a mouse, a keyboard, a WiFi card or a flash drive. If it turns out that there are too few sockets, you can increase their number usingan external USB HUB.
  • Built-in WiFiandBluetoothmodule- RDA5991for wireless communication, there is also an antenna on the board.
  • GPIO x 40 pin- general purpose outputs/inputs that can be used to operate LEDs, buttons, motor controllers. Among them there are pins supporting I2C, SPI and UART interfaces.
  • microSD slot- slot for a microSD memory card, on which the operating system can be installed.
  • CSI input- for connecting a dedicated camera.

Power supply .

The system uses the microUSB connector as the power source. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A (the manufacturer recommends 3.0 A). In our offer you will findappropriate power supplies.

Specification

Basic information
Model

Orange Pi

i96

Orange Pi

Lite

Orange Pi

PC Plus

Orange Pi

Plus 2e

Specification
Processor RDA8810P Allwinner H3 Allwinner H3 Allwinner H3
Core

Single-core

ARM Cortex-A5

1.0 GHz

Quad-Core

ARM Cortex A7

Quad-Core

ARM Cortex A7

Quad-Core

ARM Cortex A7

Graphics

Vivante GC860

3D GPU

Mali400MP2

GPU @600MHz

OpenGL ES 2.0

Mali400MP2

GPU @600MHz

OpenGL ES 2.0

Mali400MP2

GPU @600MHz

OpenGL ES 2.0

Systems

Ubuntu, Debian

Android, Raspbian

Ubuntu

Android

Ubuntu

Android 4.4

Ubuntu

Android 4.4

Memory

RAM

256 MB LDDR2

SDRAM

512 MB DDR3

SDRAM

1 GB DDR3

SDRAM

2 GB DDR3

SDRAM

Memory

microSD card

up to 64 GB

NAND Flash 500 MB

microSD card

up to 64 GB

microSD card

up to 64 GB

+8 GB EMMC

microSD card

up to 64 GB

+16 GB EMMC

Node

GPIO

40-pin connector

+ 3 pin UART

40-pin connector

+ 3 pin UART

40-pin connector

+ 3 pin UART

40-pin link

+ 3 pin UART

Power supply

5 V / 2 A

(3A recommended)

microUSB

5 V / 2 A

(3A recommended)

DC Jack

5 V / 2 A

(3A recommended)

DC Jack

5 V / 2 A

(3A recommended)

DC Jack

Buttons

Power

Power Power

Power

UBoot

IR input

Dimensions

60 x 30 mm 69 x 48 mm 85 x 55 mm 108 x 67 mm
Interfaces
USB Host

1 x USB 2.0

socket type A

2 x USB 2.0

socket type A

3 x USB 2.0

socket type A

3 x USB 2.0

socket type A
USB OTG 1x microUSB 1x microUSB 1x microUSB 1x microUSB

Interface

network

-

-

Ethernet

10/100 Mbit/s

Ethernet

1000 Mbit/s

Module

WiFi

Embedded

RDA5991

with antenna and bluetooth

Embedded

Realtek

aerial

Embedded

Realtek

aerial

Embedded

Realtek

RTL8189ETV

aerial

Video

CSI

HDMI,

HDMI CEC,

CVBS

HDMI,

HDMI CEC,

CVBS

DMI,

HDMI CEC,

CVBS

HDMI and CVBS

Audio

-

HDMI

HDMI

3.5 mm jack

microphone

HDMI

3.5 mm jack

microphone

Interfaces

UART, GPIO

UART, GPIO

UART, GPIO

UART, GPIO

UC - core 1. Single Core
UC - External memory NAND 500 MB
UC - HDMI no
UC - I2C yes
UC - UART yes
UC - Connector 5V microUSB
UC - SPI interface yes
UC - LCD interface no
UC - Camera interface yes
UC - Linux yes
UC - Android yes
UC - Windows no
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: