Product description: MyPalletizer 260 Pi - 4-axis arm robot - Raspberry Pi version - Elephant Robotics
MyPalletizer 260 Pi is a multifunctional , intelligent robotic arm that was developed by Elephant Robotics . Part of the "mypalletizer" series of products. The device was based on the Raspberry Pi 4B minicomputer. The MyPalletizer 260 Pi robot is one of the basic Elephant Robotics robots, which is widely used in artificial intelligence education and DIY. Due to its small dimensions, the device is easy to transport and has a load capacity of 250 g.
MyPalletizer 260 Pi - 4-axis arm robot - Raspberry Pi version .
Graphical programming Blockly .
Built-in Blockly Graphical Programming
It makes it easier to start and use the robot, the graphical programming language allows you to easily start using the robotic arm without much knowledge or experience in programming. Additionally, MyPalletizer 260 enables the use of programming languages such as Python .
Leads and interfaces
The device has been equipped with a wide range of interfaces and outputs such as:
- 2x USB 3.0 socket
- 2x USB 2.0 socket
- 1x USB-C socket
- 1x GPIO slot
- 1x ethernet socket
- 1x HDMI socket
- 1x audio jack
- 1x SD card slot
- 1x Grove socket
- 1x power socket
- 1x group IV slot
- 1x steering gear socket
MyPalletizer 260 Pi - 4-axis arm robot - leads.
MyPalletizer 260 Pi - 4-axis.
Compatible with all my series accessories
Thanks to the applied technical solutions, it has become possible to use all kinds of accessories from my series, which greatly expands the robot's capabilities. In addition, thanks to the plug-and-play technology, it became possible to use accessories from the moment of connection.
ROS support
ROS is one of the most popular environments for communicating with robots. ROS allows for algorithm validation within a virtual environment, which reduces the requirements for the experimental environment and improves the efficiency of experiments.
MyPalletizer 260 Pi.
MyPalletizer 260 Pi - 4-axis arm robot - Raspberry Pi version.
Technical Specifications
- Number of axles: 4
- Working range: 260 mm
- Payload: 250 g
- Power supply: DC 8V to 12V
- Communication interfaces:
- 2x USB 3.0 socket
- 2x USB 2.0 socket
- 1x USB-C socket.
- 1x GPIO slot
- 1x ethernet socket
- 1x HDMI socket
- 1x audio jack
- 1x SD card slot
- 1x Grove socket
- 1x power socket
- 1x group socket
- 1x steering gear socket
- Technologies:
- WiFi
- Bluetooth
- Drag trial teaching
- Joint movement
- Movement in the Cartesian system of references
- Track registration
- Supported Operating Systems:
- Linux
- Windows
- Supported Environments:
- Arduino
- Myblockly
- RoboFlow
- Supported programming languages:
- Python
- C #
- C ++
- Java Script
- Platform: mystudio
Useful links |
