Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino - zdjęcie 1
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino - zdjęcie 2
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino - zdjęcie 3
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino - zdjęcie 4
Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino - zdjęcie 5

Espresso Lite V2.0 - wifi module ESP-WROOM-02 - compatible with Arduino

Index: CTN-12408
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Board with soldered wifi ESP-WROOM-02 module, it communicates through UART interface. On board are 11 GPIOs with the support for I2C and SPI, analog inputs, voltage regulator and three buttons: Reset and two buttons pulled up to GPIO13 and GPIO0 pin. Powered with the voltage from 5 V to 12 V.

€9.90
€8.05 tax excl.
Unavailable
Discontinued product
30-day returns
PayPal payment
Manufacturer: Cytron

Attention!

The product has been discontinued. Check others products incategory.

Description

Board with soldered wifi ESP-WROOM-02 module, it communicates through UART interface. On board are 11 GPIOs with the support for I2C and SPI, analog inputs, voltage regulator and three buttons: Reset and two buttons pulled up to GPIO13 and GPIO0 pin. Additional connectors allow you to connectan I2C OLED display. Programmed in the environment ofArduino IDE.

Specification

  • System: ESP-WROOM-02
  • Supply voltage: 5 V to 12 V
  • Working voltage: 3 V to 3.6 V
  • Current consumption:
    • Deep sleep: up to 10 uA
    • With the power off: up to 5 uA
  • Voltage regulator: 3.3 V / 0.8 A (temporary 1 A)
  • Connectors for connecting the OLED screen
  • The wi-fi standard: IEEE 802.11 b/g/n / 2.4 GHz
  • Wi-Fi Mode: SoftAP / Station / SoftAP + Station
  • Security: WPA / WPA2
  • Encryption: WEP / TKIP / AES
  • ADC transducer: 10-bit
  • Protocol: TCP / IP
  • Built-in: TR switch, balun, LNA, PLL
  • Interfaces:
    • 11 GPIO
    • UARt
    • I2C
    • I2S
    • SPI
    • PWM
  • Output power at 802.11 b: +20 dBm
  • Dimensions: 60 x 25 mm

Set includes

  • The Espresso Lite V2.0 module
  • 2x goldpin male 1 x 10-pin strip
  • 2x goldpin female 1 x 4-pin strip
  • 1x goldpin male angled 1 x 6-pin strip

Voltage to 5.0 V
Voltage from 12.0 V
Voltage output from 3.3 V
Output voltage to 3.3 V
UC - Microcontroller ESP-WROOM-02
UC - Flash 4096 kB
UC - RAM 64 kB
UC - core 1. Single Core
UC - Digital pins 11
UC - freq 80MHz
UC - A/C 10-bit
UC - PWM 3
UC - WiFi yes
UC - I2C yes
UC - UART yes
UC - SPI interface yes

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

ESP8266 wifi module + NodeMcu v3

Wi-fi module, based on ESP8266 system. On Board 10 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in 10-bit ADC and a converter USB-UART. It has installed...
Index: MOD-08241
Index: MOD-08241
Czas oczekiwania: ok. 10-30 dni
Regular price €5.60 Price €5.60

Waterproof probe with temperature sensor DS18B20 - 1m

Waterproof probe is equipped with a digital thermometer DS18B20 with cable with length of 1 meter.
Index: SES-01713
Index: SES-01713
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.23 Price €2.23

Temperature sensor DS18B20 - digital 1-wire THT

Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.
Index: SES-00165
Index: SES-00165
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.00 Price €2.00

Module with addressed RGB LED WS2811

Module with digital addressed diode RGB WS2811 with outputs with the raster of 2.54 mm, for mounting of goldpin connectors (included). It allows you to get any color with a...
Index: MOD-06904
Index: MOD-06904
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.65 Price €0.65

OLED blue graphic display 1.3’’ 128x64px I2C v2 - blue characters

OLED blue display with a diagonal of 1.3 " and a resolution of 128 x 64 px. The screen is based on SH1106 driver, works with voltages of 3.3 V and 5 V, and communicates over...
Index: MOD-08867
Index: MOD-08867
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.90 Price €11.90

Adafruit STEMMA - TSL2561 Digital Lux / Light Sensor

Module to add functions to measure the light intensity of the environment for constructed projects. Applied sensor TSL2561 runs in the range of from 0.1 to 40K+, it is powered...
Index: ADA-09814
Index: ADA-09814
Unavailable
Regular price €9.90 Price €9.90

WiFi module ESP8266 + relay - 10A / 125VAC contacts - 5V coil

The module is equipped with SRD-05 relay with coil powered with the voltage of 5 V, it was also equipped with an ESP8266 module that provides control over the devices through...
Index: MOD-09391
Index: MOD-09391
Unavailable
Regular price €8.78 Price €8.78

WiFi module ESP-01 ESP8266 Black - 3 GPIO, 1MB, PCB antenna

Wi-fi module based on the ESP8266 chip. Works in standard wi-fi 802.11 b/g/n at 2.4 GHz. Has 8 leads - pitch of 2.54 mm, of which 3 are GPIO. Has a 1 MB Flash memory,...
Index: MOD-04527
Index: MOD-04527
Czas oczekiwania: ok. 10-30 dni
Regular price €3.58 Price €3.58

Onion Omega 2 Plus WiFi

One of the smallest available on the market IoT module that are running with Linux. Works on the basis of processor Mediatek MT7688 with frequency signal of 580 MHz, has 128 MB...
Index: ONN-08403
Index: ONN-08403
Unavailable
Regular price €16.65 Price €16.65

Onion Expansion Dock

Extension module for Onion  Omega 2, which allows, among other, to power the device via a microUSB port and a built-in stabilizer 3.3 V. In addition, it has a Converter...
Index: ONN-08446
Index: ONN-08446
Unavailable
Regular price €16.20 Price €16.20

NanoPi NEO v1.31 - Allwinner H3 Quad-Core 1.2GHz + 512MB RAM - with headers

Miniature computer NanoPi in version 1.3 Neo with processor-Allwinner H3 quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. Tile has a 512 MB DDR3 RAM, built-in...
Index: NNP-10945
Index: NNP-10945
Unavailable
Regular price €20.23 Price €20.23

USB adapter for female cables with USB-UART converter PL2303 - Waveshare 7965

The adapter allows you to connect a USB to many different modules, with built-in converter USB to UART PL2303. Completed with female wire connectors. The system is compatible...
Index: WSR-04470
Index: WSR-04470
Czas oczekiwania: ok. 10-30 dni
Regular price €2.14 Price €2.14

Products from the same category

VR Glasses Blow VR Box for smartphones 4-6’’

Glasses are designed to view 3D videos or play games in virtual reality. Place them in a smart phone running an appropriate application. Has aspheric lenses are not...
Index: ZAS-07690
Index: ZAS-07690
Unavailable
Regular price €6.53 Price €6.53

3D printer - Creality CR-10S4

3D printer made by Creality is designed to print elements with dimensions 400 x 400 x 400 mm. The kit consists of partially assembled elements, so the installation takes only...
Index: CRL-13235
Index: CRL-13235
Unavailable
Regular price €606.38 Price €606.38

nRF52832 Bluetooth BLE SoC - compatible with Arduino - SparkFun WRL-13990

A module that provides Bluetooth BLE communication, compatible with the Arduino IDE. It has a nRF52832 SoC system based on Cortex-M4F core with 64 KB of RAM and 512 KB of Flash...
Index: SPF-08067
Index: SPF-08067
Unavailable
Regular price €19.80 Price €19.80

Universal Multimeter Velleman DVM892N

Multimeter enables to measure DC and AC current up to 700 V, DC up to 15 A and resistance to 20 Megaohms. The device has a function of measuring temperature, capacitance,...
Index: VEL-13994
Index: VEL-13994
Unavailable
Regular price €38.03 Price €38.03

MakeBlock 71943 - Brass Distance Bolts M4x12 - 10pcs.

Brass spacers M4x12 with a length of 17.8 mm. Set consists of 10 pieces.
Index: TRB-10339
Index: TRB-10339
Unavailable
Regular price €4.28 Price €4.28

Case for Raspberry Pi 4B aluminum VESA - green - LT-4B01-A

The housing is made of durable aluminum in green . The case design is dedicated for Raspberry Pi 4B minicomputer. Thanks to the use of durable aluminum, the enclosure...
Index: LON-15257
Index: LON-15257
Unavailable
Regular price €14.60 Price €14.60

MakeBlock 95004 - beams 0808 - blue - set

Set includes 8 medium beams 0808 with length from 88 mm to 184 mm. They are often used to design  platforms MakeBlock . Beams are blue.
Index: TRB-10365
Index: TRB-10365
Unavailable
Regular price €31.28 Price €31.28

Quick connector with solder + heat shrink foil 4-6mm2 E5634

Heat-shrinkable quick release coupling with tin, 40 mm long and 8 mm internal width . There is a tin ring in the tube, which when heated to 150°C melts and connects the...
Index: LEC-16416
Index: LEC-16416
Unavailable
Regular price €0.32 Price €0.32

MakeBlock 95022 - Thread Drive Pack V2.0 - Drive kit - blue

Set includes elements commonly used in the design of the drive. The se includes items such as the motor, beams, screws, threads.
Index: TRB-10366
Index: TRB-10366
Unavailable
Regular price €38.03 Price €38.03

Insecticide lamp Q31A

Lamp designed to eliminate flying insects. The device allows for hygienic removal of flies and mosquitoes that plague household members without contaminating the room...
Index: GOT-17022
Index: GOT-17022
Unavailable
Regular price €7.99 Price €7.99

MakeBlock 60006 - sliding beam 0824-032 - blue - 2pcs

The sliding beam 0824-032 is a commonly used mechanical part of the MakeBlock platform. It has mounting holes and a groove with thread on its surface, allowing you to easily...
Index: TRB-10393
Index: TRB-10393
Unavailable
Regular price €4.28 Price €4.28

WiFi weather station with screen - Velleman WC224

Indoor and outdoor weather station with colour display . The device communicates over a WiFi network and the collected data is sent to the Wunderground cloud, which can be...
Index: VEL-17387
Index: VEL-17387
Unavailable
Regular price €178.88 Price €178.88