DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+
DJI Phantom 4 Pro+ - zdjęcie 1
DJI Phantom 4 Pro+ - zdjęcie 2
DJI Phantom 4 Pro+ - zdjęcie 3
DJI Phantom 4 Pro+ - zdjęcie 4
DJI Phantom 4 Pro+ - zdjęcie 5
DJI Phantom 4 Pro+ - zdjęcie 6
DJI Phantom 4 Pro+ - zdjęcie 7
DJI Phantom 4 Pro+ - zdjęcie 8
DJI Phantom 4 Pro+ - zdjęcie 9
DJI Phantom 4 Pro+ - zdjęcie 10
DJI Phantom 4 Pro+ - zdjęcie 11
DJI Phantom 4 Pro+ - zdjęcie 12
DJI Phantom 4 Pro+ - zdjęcie 13

DJI Phantom 4 Pro+ V2 drone - 4k UHD camera

Index: ROB-12470
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

New DJI Phantom 4 Pro+ V2 has an OcuSync transmission system supporting automatic change of frequency, provides a wireless connection to DJI Goggles and increases transmission distance up to 4 km. Applying a new drive system has helped to reduce the noise level by 60%. Improved obstacle detection system can detect them already from 30 meters.

PLN6,991.06
PLN6,991.06 tax excl.
Unavailable
Discontinued product
30-day returns
PayPal payment
Manufacturer: DJI

Attention!

The product has been discontinued. Check others products incategory.

Description

New DJI Phantom 4 Pro+ V2 has an OcuSync transmission system supporting automatic change of frequency, provides a wireless connection to DJI Goggles and increases transmission distance up to 4 km. Applying a new drive system has helped to reduce the noise level by 60%. Improved obstacle detection system can detect them already from 30 meters.

Camera

Advanced version is an improved model of the Phantom 4. The model was equipped with a camera with 1" diagonal and with 20 MPx lens, which can record video with a 4K resolution at 60 kl/s. The Burst Mode allows you to make a series of shots, then choose the best one of them. Adjustable mechanical shutter eliminates blurry shots.

 

Video

 

Design

The body of the new Phantoma was made of titanium and magnesium alloy which makes it very stable, and at the same time its weight is similar to the regular version. Phantom 4 Pro+ V2 is equipped with a FlightAutonomy system which provides smart avoiding of the obstacles - double vision sensors in the front and on the bottom, 5-direction obstacle detection system to 4-direction system of avoid them.

 

Improved controller and wider range

Improved controller in combination with the system OcuSync provide incredibly sharp images at maximum reach. Thanks to the option to choose between 2.4 GHz and 5.8 GHz frequency all interferences and delays have been eliminated. Intelligent Time Division Multiplexing system analyzes the available signal levels and automatically selects the transmission frequency on the lowest level of interference. The device provides HD transmission without any interference, even in flights up to 7 kilometers.

The set includes a monitor with a diagonal of 5.5 " display with a brightness of 1000 CD /m2, which is two times more than traditional screens. Because of this, the colors are bright and very visible even in strong sunlight. The built-in DJI app GO provides complete optimization of hardware and software. The controller is equipped with an HDMI port, a microSD slot, speaker and microphone. Photo editing is performed directly on the device via the DJI app GO.

 

 

Draw mode

Phatom 4 Pro has a Draw mode that allows you to manage drone in the most innovative way. You just need to draw a line on the screen, and the device will follow this direction, while maintaining complete stability. This allows you to concentrate on the camera, and to create a more complex scene. There is a choice of two modes:

  • Standard: drone moves at a constant speed in the direction in which the transmitter is turned
  • Free: drone moves along a fixed route, regardless of the position of the transmitter

ActiveTrack mode

This mode allows automatic recognition of objects, following them and focusing when they are in motion. Thanks to this mode, creating complex scenes becomes much easier. Modern algorithm can keep the frame in focus, even with fast-moving objects such as people, animals or cars. There are three modes of operation:

  • Trace: tracking the object in front or back with automatic avoidance of obstacles
  • Profile: flight around the object at different angles to get different shots
  • Spotlight: free flight, the object is constantly in the frame

 

TapFly mode

This mode allows you to fly by tapping on the places of destination on the screen. To change direction, you need to click on the screen again or use the transmitter. AR feature shows the direction of flight in real time. There is a choice of TapFly three modes:

  • TapFly Forward: tap to fly in the chosen direction
  • TapFly Backward: tap to fly in the opposite direction than the selected oner, for example, touching the lower right corner of the screen causes the flight backwards toward the upper left
  • TapFly Free: lock the chosen direction to freely rotate the camera. In this mode avoiding the obstacles is disabled

Return to home mode

Phantom 4 Pro has an improved version of the Return to Home mode, which selects the optimal path taking into account the terrain. During the flight, the drone records the history of routes, enabling you to return on the same route, avoiding obstacles. It is able to record the time of landing and compare it with the previous one, in order to accurately match the contact with the ground. Phantom 4 Pro can also analyze if the landing site is suitable. When an obstacle is detected, for example water, the drone climbs to a safe distance, waiting for movement and possibility of safe landing.

Gesture control

Advanced vision technology recognizes user's commands through gestures. This allows you to, for example, take a selfie without the use of the transmitter. When lifting the arm up, standing in front of the camera, movement is detected and the camera puts us in the center of the frame. Then the shoulders movement activates a 3-second countdown before taking the picture.

Advanced flight modes

Phantom 4 Pro offers 3 flight modes:

  • Position: features Mode, TapFly and ActiveTrack are on. Obstacle detection and stabilization available.
  • Atti: disabled satelite stabilization, maintained altitude, speed limited to 7 km/h It allows you to record smoother footage.
  • Sport: increased maneuverability, maximum speed up to 72 km/h.

Additional sensors

Phantom 4 Pro has two compass modules and double IMU units, which provide stable flying and analyze its parameters in real time. Advanced algorithms allow to maintain the safety and precision of flight.

Smart battery

Phantom 4 Pro has a powerful battery that allows even 30 minutes of flight. The DJI GO app  shows the battery charge status in real time and estimated time until the discharge. It also reports when the device reaches the max distance, ensuring the safe return of the drone to the starting point. An advanced control system prevents overheating and excessive battery discharge.

Specification

  • Phantom 4 Pro is ready to fly straight out of the box
  • Special systems provide a stable flight without vibration
  • LEDs indicate the current device status (including battery level)
  • Built-in obstacle detection system operating in the range from 0.7 m up to 30 m
  • Intelligent control systems: Draw, ActiveTrack, TapFly, Return to Home, gesture control
  • Battery LiPol 4S 5870 mAh battery allows for 30 minutes of flight
  • Controller battery: 6000mAh Lipo 2S
  • 5,5 " Monitor with brightness level 1000cd/m2
  • Module GPS / GLONASS, provides stabilization of the position
  • Range: 7000 m
  • 3-axes gimbal range of motion: pitch from -90 ° to +30 °
  • Camera recorded in 4 K resolution at 60 K/h
  • Return to home provides an automatic return of the drone
  • Diagonal: 350 mm
  • Maximum flight speed: 20 m/sec
  • Weight: 1380 g

 

Detailed specification is available onthe DJI website.

 

Included

  • Phantom 4 Pro+
  • 5,5 " Monitor
  • Remote control
  • 4 pairs of propellers
  • Intelligent battery
  • Charger
  • Memory card micro SD 16GB
  • Protection of the gimbal
  • Cables set
  • The user manual

 

Length 490 mm
Width 490 mm
Height 190 mm
Drone - Range 7000 m
Drone - Camera yes
Drone - Flight time 30 min
Drone - FPV preview yes

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Products from the same category

Robotic Arm Dagu RA001 - 6 servos + controller

Made of metal, ready-to-use robotic arm is equipped with 6 servos with six degrees of operation ease. There is also a special Arexx controller, cable and a battery container.
Index: ROB-02880
Index: ROB-02880
Unavailable
Regular price PLN893.50 Price PLN893.50

3D Printer Dobot Mooz-3 WiFi

3D printer designed by Dobot. The mould size is 130 x 130 x 130 mm. It has a modular design, made of metal, making the installation very fast and simple. It also includes a...
Index: DBT-12261
Index: DBT-12261
Unavailable
Regular price PLN2,600.81 Price PLN2,600.81

Plastic case Kradex Z70JU IP54 - 75x58x28mm light-colored with props

2-part, universal case for an electronic circuit. External dimensions 75,15 x 58,3 x 27,9 mm.
Index: KDX-05950
Index: KDX-05950
Unavailable
Regular price PLN5.04 Price PLN5.04

DC motor with 1:90 3-6V transmission with double shaft - Bi-Meta

1:90 gear motor . After gearing, the double shaft rotates at a speed of up to approx. 120 rpm when powered by 6 V. It is supplied with the voltage from 3 V to 6 V ,...
Index: DNG-12461
Index: DNG-12461
Unavailable
Regular price PLN9.67 Price PLN9.67

VR Glasses Blow VR Box for smartphones 4-6’’

Glasses are designed to view 3D videos or play games in virtual reality. Place them in a smart phone running an appropriate application. Has aspheric lenses are not...
Index: ZAS-07690
Index: ZAS-07690
Unavailable
Regular price PLN23.58 Price PLN23.58

3D printer - Creality CR-10S4

3D printer made by Creality is designed to print elements with dimensions 400 x 400 x 400 mm. The kit consists of partially assembled elements, so the installation takes only...
Index: CRL-13235
Index: CRL-13235
Unavailable
Regular price PLN2,191.06 Price PLN2,191.06

nRF52832 Bluetooth BLE SoC - compatible with Arduino - SparkFun WRL-13990

A module that provides Bluetooth BLE communication, compatible with the Arduino IDE. It has a nRF52832 SoC system based on Cortex-M4F core with 64 KB of RAM and 512 KB of Flash...
Index: SPF-08067
Index: SPF-08067
Unavailable
Regular price PLN71.54 Price PLN71.54

Universal Multimeter Velleman DVM892N

Multimeter enables to measure DC and AC current up to 700 V, DC up to 15 A and resistance to 20 Megaohms. The device has a function of measuring temperature, capacitance,...
Index: VEL-13994
Index: VEL-13994
Unavailable
Regular price PLN137.40 Price PLN137.40

MakeBlock 71943 - Brass Distance Bolts M4x12 - 10pcs.

Brass spacers M4x12 with a length of 17.8 mm. Set consists of 10 pieces.
Index: TRB-10339
Index: TRB-10339
Unavailable
Regular price PLN15.45 Price PLN15.45

Case for Raspberry Pi 4B aluminum VESA - green - LT-4B01-A

The housing is made of durable aluminum in green . The case design is dedicated for Raspberry Pi 4B minicomputer. Thanks to the use of durable aluminum, the enclosure...
Index: LON-15257
Index: LON-15257
Unavailable
Regular price PLN52.76 Price PLN52.76

MakeBlock 95004 - beams 0808 - blue - set

Set includes 8 medium beams 0808 with length from 88 mm to 184 mm. They are often used to design  platforms MakeBlock . Beams are blue.
Index: TRB-10365
Index: TRB-10365
Unavailable
Regular price PLN113.01 Price PLN113.01

Quick connector with solder + heat shrink foil 4-6mm2 E5634

Heat-shrinkable quick release coupling with tin, 40 mm long and 8 mm internal width . There is a tin ring in the tube, which when heated to 150°C melts and connects the...
Index: LEC-16416
Index: LEC-16416
Unavailable
Regular price PLN1.14 Price PLN1.14