- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: FlashForge washable LCD 3D printer resin 0,5kg - Grey
Grey photopolymer resin used in open source 3D print ers that use light emitted by LCD projectors to form prints. It is cured by 405 nm light waves. It has a short exposure time. During printing, a slight odor may be released. Should be printed in well ventilated rooms. Ready models made of FlashForge Washable LCD resin are characterized by high detail and smooth surface. Package contains 0,5 kg of product.
Resin for 3D printers FlashForge Washable LCD 0,5 kg - Grey.
Resin for 3D printers - example printout.
FlashForge Washable LCD Resin
3D printing safe resin is easy to clean. It can be easily washed off with water. The product is heat resistant, does not deform easily, and is mechanically durable. Models can be painted, so the material can be used to print modeling figures for amateurs.
Resin for 3D printers
Resin is a light-cured material designed for 3D printing. 3D printers using DLP and LCD technology can be successfully used to create even very detailed models. It is worth remembering that resin for 3D printing emits a slight odor, so all rooms where there are printers of this type, must be very well ventilated.
When working with the resin, always use protective equipment: glasses and nitrile gloves.
Shake the resin before use.
Specification of resin for 3D printers
| Parameter | Value |
|---|---|
| Manufacturer | FlashForge |
| Resin type | LCD photopolymer washable |
| Colour | Grey |
| Density | 1.13 to 1.24 g/ml |
| Viscosity | 160 to 220 cps (at 25°C) |
| Shore Hardness | 84 |
| Tensile Strength | 32 MPa |
| Tensile elasticity | 2200 MPa |
| Elongation at tension | 8% |
| Bending strength | 58 MPa |
| Packing capacity | 500 g |
Useful links |
