All mechanical and electronic systems require power. Without it, they cannot work. They need an energy source that drives them to operate. It is impossible to construct a machine that would work continuously without any energy source. With the development of technology, more and more sources of energy are emerging, which makes mobile devices that do not require a permanent power supply. These are accumulators and batteries, thanks to which we can use the device anytime and anywhere. They are perfect for mobile robots and mobile devices. Alternatively, there are power supplies, which in turn are plugged into an electrical outlet to provide power to the device, then it starts to work. A modern and at the same time inexhaustible source of energy is the sun. More and more often solar panels appear on the roofs of a building, whose task is to collect solar energy and convert it into electricity. Similar, but smaller panels are used in devices and machines, as well as to charge car batteries.
StampS3Breakout - expansion board for M5Stamp series - M5Stack A129
Index: MSS-23506
- Reduced price
- Promotion
Soldering station hotair and tip-based 2in1 Zhaoxin 852DH - 75W
Index: LUT-09834
- Reduced price
- Promotion
- Reduced price
- Promotion
ON-OFF switch monostable - PBW-16BPD - 2A 250V - flat green point
Index: AKS-10817
- Reduced price
- Promotion
Power supply
Loading...
Clip for 9V battery with cable - 15cm
Connector for easy connection of popular 9 V (6F22) batteries with stripped cable ends.
Index: AKC-00416
Index: AKC-00416
Battery holder for 4 AA (R6) batteries with cover and switch
Basket with lid and switch for four AA batteries (big sticks).
Index: AKC-00236
Index: AKC-00236
9V 4022 6LR61 Alkaline Battery Varta Industrial
Alkaline battery Varta Industrial 4022 6LR61 with rated voltage of 9 V.
Index: BAT-02161
Index: BAT-02161
Power supply for Raspberry Pi 4 - USB C 5,1V / 3A - original black
Original , black power supply for the minicomputer Raspberry Pi 4 with USB-C connector . The maximum current efficiency is 3 A.
Index: RPI-14348
Index: RPI-14348
justPi power supply for Raspberry Pi 3B+/3B/2B/Zero - microUSB 5V/2,5A
A power supply equipped with a microUSB connector compatible with the Raspberry Pi mini-computer. It has parameters allowing for optimal power supply to the Raspberry Pi 3B+ /...
Index: ZAS-07363
Index: ZAS-07363
- Reduced price
- Promotion
A basket for one 18650 type battery. It has wires with insulation removed at their ends, which facilitates installation of the device.
Index: AKC-05242
Index: AKC-05242
Battery Blow Super Heavy Duty 6F22 9V
Blow Super Heavy Duty 6F22 battery with 9 V nominal voltage.
Index: AKU-04381
Index: AKU-04381
- Reduced price
- Promotion
Power supply justPi C USB 5V/3A for Raspberry Pi 4B
Dedicated power supply for the Raspberry Pi 4B minicomputer (1 GB, 2 GB and 4 GB RAM). It has parameters consistent with the recommendations of the Raspberry Pi foundation:...
Index: SHR-14516
Index: SHR-14516
Power supply 5V/2,5A - DC plug 5,5/2,5mm
Stabilized mains power supply. Power supply: 110 - 240 V. Output voltage: 5 V DC. Output current: 2.5 A.
Index: ZAS-01364
Index: ZAS-01364
Index: AKC-00486
Switch-mode power supply 12V/2,5A - 220V-240V - DC plug 5,5/2,5mm
Stabilized power supply unit. Supply voltage: from 220 V to 240 V AC. Output voltage: 12 V DC. Output current: 2,5 A. Connector: DC 5,5 / 2,5 m plug.
Index: ZAS-05043
Index: ZAS-05043
Power supply for Raspberry Pi 4 - USB C 5,1V / 3A - original white
Original , white power supply for the minicomputer Raspberry Pi 4 with USB-C connector . The maximum current efficiency is 3 A.
Index: RPI-14488
Index: RPI-14488
Battery clip 9V (6F22) with cable
A connector to facilitate the connection of popular 9-volt (6F22) batteries with cables with insulation removed at the ends.
Index: AKC-05502
Index: AKC-05502
Power supply 5V / 2A - microUSB for Raspberry Pi Zero
Power supply dedicated to power the Raspberry Pi Zero minicomputer . Output voltage is 5 V and current capacity is max. 2 A. The power supply is equipped with a 1.2 m...
Index: ZAS-08849
Index: ZAS-08849
Battery holder - 3 x AA (R6) with cover and switch
Basket with lid and switch for three AA batteries (big sticks).
Index: AKC-00174
Index: AKC-00174
Index: AKC-00173
Battery holder for 2 AA (R6) batteries with cover and switch
Basket with cover and switch for two AA batteries (large fingers).
Index: AKC-00738
Index: AKC-00738
EverActive Pro AA (R6 LR6) alkaline battery - 4pcs.
The popular big stick AA (R6 LR6), with a nominal voltage of 1.5 V . The battery is manufactured by EverActive. The set includes 4 batteries.
Index: BAT-09343
Index: BAT-09343
Lipol charger TP4056 1S 3,7V microUSB with protection
Simple charger for 1-purpose lithium-polymer batteries with a nominal voltage of 3.7V. The system is powered via a microUSB connector or by wires. The module is protected...
Index: MOD-06944
Index: MOD-06944
justPi power supply microUSB 5,1V / 3A for Raspberry Pi 3B+/3B/2B/Zero
Power supply with a 1.2 m cable terminated with a microUSB plug. The parameters of the power supply ensure optimal power supply to the Raspberry Pi mini-computer. The output...
Index: ZAS-09707
Index: ZAS-09707
Cell holder for 2x 18650 - serial connection
A basket for two 18650 type batteries. It has wires with insulation removed at their ends, which makes it easy to install the device.
Index: AKC-05240
Index: AKC-05240
Power supply MW Power EA10502D3 12V/3,5A - DC plug 5,5/2,1mm
Switching power supply EA10502D3 for powering LED lighting and other electronic devices with an output voltage of 12 V, output power of 42 W. Thanks to the built-in...
Index: WAK-15680
Index: WAK-15680
Index: AKC-01654
Raspberry Pi 27W USB-C Power Supply - official 5,1V / 5A PSU for Raspberry Pi 5 - black
Official Raspberry Pi power supply with USB Type-C input and Power Delivery (PD) technology with a power of 27 W. It can provide a current with a maximum efficiency of 5...
Index: RPI-23907
Index: RPI-23907
Accumulators and batteries
In the past, the electronics market was dominated by ordinary (disposable) batteries and nickel-metal hydride (NiMH) and nickel-cadmium (NiCd) batteries. The popularization of lithium-polymer (Li-Po) and lithium-ion (Li-Ion) batteries with small dimensions and weight and huge capacities, unattainable for other types of batteries, has caused a revolution - both in the category of mobile devices and RC models and robotics amateur. In this category you will find a wide range of batteries of all types mentioned, as well as various types of batteries in the most common dimensional standards. You will also find large gel batteries here.
Chargers for all types of batteries
Once you have selected the battery, you must also equip yourself with a charger appropriate to its characteristics and size. Our offer includes both chargers for modeling packages and classic "finger" batteries in sizes R6 and R03. We also have special chargers dedicated to car batteries, including modern gel batteries, which have effectively replaced the old lead-acid designs from the market. In addition to ready-made devices, you will also find various types of charger modules that will allow you to easily build a charging function into your device (e.g. a robot), without having to worry about designing the necessary safeguards to protect the battery against overheating or even explosion. This category included probably the most popular types of chargers - micro USB and USB C, as well as wireless ones dedicated to mobile devices.
Power supplies from A to Z
Our offer of power supply components and devices would not be complete if we did not provide all types of power supplies, used not only in connection with everyday devices, but also in electronics services and design studios. Here you will find a wide range of single- and multi-output laboratory power supplies, ATX computer power supplies, as well as uninterruptible power supplies (UPS) used to protect computer equipment or measuring equipment. We also have a wide range of power supplies for wall sockets (plugs), as well as industrial and automotive power supplies.
Power - FAQ
When selecting a power supply for any device, check what power parameters it requires. First of all, you need to take into account the type of power supply (AC or DC), current efficiency (amperage) and voltage, as well as select a power cable with appropriate capacity and with the right connector .