Product description: M5Stack Core2 - developer module - ESP32-D0WD-V3.
The second generation ofCoreseries development modules. Equipped withESP32-D0WD-V3chip using Xtensa 32-bit 240 MHz LX6 dual core processor. The module also has integratedWiFiandBluetoothwireless communication modules, as well as16 MBFlashmemory and8 MBPSRAM. The device is powered and programmed using aUSB type Cconnector. Core 2 is equipped with a2" touch screen displayas well as a built-invibration motorandRTC clock system. The new generation is also an improved power supply system, the battery capacity has been increased to390 mAh, and a diode has been added which informs us about the battery charge status.AXP192is responsible for the power system. Physical, programmable buttons were replaced by capacitive buttons. The device is equipped with the well-know USB CandGroveconnectors from previous generations, as well asSD cardslot andM-busconnectors hidden under the flap on the back of the case. Inside the module there is also a speaker, microphone and 6-axisIMUsensor.
Core 2 module is equipped with a touch screen display.
Module without rear housing.
Programming of Core2 module
The device is programmed using the USB C connector, a suitable 20 cm long cable is included. M5Stack products can be programmed using dedicatedUIFlowgraphic environment, MicroPython language and Arduino IDE environment. You will also need the appropriate firmware uploaded to our module. Firmware can be uploaded using manufacturer's dedicated programs, i.e.M5BurnerandEasy Loader.
Main product features
- Wireless WiFi and Bluetooth communication
- 16 MB flash memory
- 8 MB PSRAM
- Built-in speaker and microphone
- Energy Management System AXP192
- Memory card slot (up to 16 GB)
- Li-Ion 390 mAh battery with charge status LED
- 6-axis IMU
- M-bus connector
Applications for the M5Stack Core2 module
- IoT device controller
- Intelligent building systems master module
- Education and programming learning
Technical Specification
- Controller: ESP32-D0WD-V3
- Processor: Dual-core Xtensa 32-bit 240 MHz LX6
- Input voltage: 5 V / 500 mA
- Flash memory: 16 MB
- PSRAM: 6 MB
- Display: ILI9342C 2" TFT 320 x 240 px
- Microphone: SPM1423
- IMU: MPU6886
- RTC: BM8563
- PMU: AXP192
- Interfaces: I2C, UART
- Battery: 3.7 V / 390 mAh
- Dimensions: 54 x 54 x 16 mm
- Weight: 52 g
In our offer you will also find other M5Stack devices and modules.
