Set of PETG filaments for schools - 6kg - Devil Design

Index: ZES-22850
A set of PETG filaments from Devil Design in 6 different colors, which is ideal as equipment for schools and universities conducting classes with the use of 3D printers. There is 1 kg of filament on each spool, and their total weight is 6 kg .
Set of PETG filaments for schools - 6kg - Devil Design
€128.50
€104.47 tax excl.
Available
Shipping in 24 hours
PayPal payment
Devil Design PETG - filament kits:
Manufacturer: Devil Design

Product description: A set of PETG filaments for schools - 6 kg - Devil Design

A set of PETG filaments from Devil Design in 6 different colors, which is ideal as equipment for schools and universities conducting classes using 3D printers . It will also be a good solution for people who are interested in printing as a hobby and need materials in different colors for their projects. The main features of PETG filament are high strength and low shrinkage . It has a wide range of applications and, thanks to its very good adhesion, enables the creation of prints with high aesthetic values. There is 1 kg of filament on each spool, and their total weight is 6 kg .

A set of PETG filaments for schools - 6 kg - Devil Design.

Devil Design PETG filament in red.

Kit contents

  • Filament Devil Design PETG 1.75 mm 1 kg - Black
  • Filament Devil Design PETG 1.75 mm 1 kg - White
  • Filament Devil Design PETG 1.75 mm 1 kg - Super Blue
  • Filament Devil Design PETG 1.75 mm 1 kg - Red
  • Filament Devil Design PETG 1.75 mm 1 kg - Bright Green Transparent
  • Filament Devil Design PETG 1.75 mm 1 kg - Bright Yellow

PETG filament properties

  • Odorless and non-toxic when printing
  • Highly flexible
  • Waterproof
  • It has a low shrinkage of the material
  • Glossy surface
  • Resistant to abrasion and mechanical damage

Devil Design PETG filament in black.

Suggested filament printing parameters

printing temperature From 220°C to 250°C
table temperature From 70°C to 80°C
Cooling Optional

Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Technical specification and physical properties of the filaments

Parameter Range
Filament diameter 1.75mm
printing temperature From 220°C to 250°C
table temperature From 70°C to 80°C
Spool - material PETG
Desiccant Yes
Vacuum packing Yes
Total Net Weight 6 kg

Colour blue
Colour red
Colour green
Colour black
Colour white
Colour yellow
Filament - material PETG
Filament - diameter 1.75 mm
Package width 37.7 cm
Package height 30.7 cm
Package depth 28.5 cm
Package weight 8.8 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: