Product description: TFT LCD display 0,96'' 160x80px SPI - color - DFRobot DFR0847
A small, color 16-bit TFT LCD display with a diagonal of 0.96" and a resolution of 160 x 80 px. The screen is based on ST7735 chip. The IPS viewing angle is 60 / 60 / 60. The module uses SPI interface for communication, is powered from 3.3 V to 5 V and consumes less than 15 mA of current. It supports the DFRobot GDI interface and can be connected directly to the GDI controller using the FPC connector. The display works with Arduino, ESP, FireBeetle, among others.
Main features of the LCD display
- TFT material, better display effect
- GDI interface, no soldering required
- Narrower board. Easy to integrate into small projects
Application of the display
- Smart clothing projects
- Mobile devices
- Smart building products
Display module pinouts
The TFT LCD display module uses an SPI interface for communication. It is powered by 3.3 V to 5 V and is equipped with the following pinouts:
- VCC: supply voltage from 3.3 V to 5 V
- GND: system ground
- SCLK: SPI clock line
- MOSI: SPI data output
- CS: chip selection
- RT: reset
- DC: data/commands
- BL: screen backlight
LCD display specification
- Supply voltage: 3.3 V to 5 V
- IPS viewing angle: 60 / 60 / 60 / 60
- Color depth: 16-bit (RGB565)
- Resolution: 160 x 80 px
- Diagonal: 0.96"
- Interface: SPI
- Controller: ST7735
- Brightness: 250 cd/m2
- Current consumption: 15 mA
- Operating temperature: -30°C to 70°C
- Display size: 10.8 x 21.7 mm
- Module dimensions: 13.5 x 34 mm
Set contents
- 0.6" 160 x 80 px TFT LCD display
- 10-pin goldpin strip 2,54 mm
- FPC 18-pin tape 0,5 mm - 10 cm