• New

MW-UDG wall RFID reader - 125kHz - gray

Index: NEX-21599
Netronix MD-UDG is a wall-mounted RFID reader that allows for contactless reading of data from Unique transponders. Such transponders are equipped with permanent, unique, 40-bit identification numbers. Each transponder has a unique identification number. The MD-UDG reader transmits the data read from the transponders via the 1-wire bus. Data from the reader is sent in a format compatible with DS1990 chips. The device is also equipped with a touch button and a LED signaling diode. Works with voltage from 7 V to 25 V. Housing version in gray .
MW-UDG wall RFID reader - 125kHz - gray
€26.67
€21.68 tax excl.
Available
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Netronix

Product description: MW-UDG RFID wall reader - 125kHz - gray

Netronix MD-UDG is a wall-mounted RFID reader that allows for contactless reading of data from Unique transponders. Such transponders are equipped with permanent, unique, 40-bit identification numbers. Each transponder has a unique identification number. The MD-UDG reader transmits the data read from the transponders via the 1-wire bus. Data from the reader is sent in a format compatible with DS1990 chips. MW-UDG is also equipped with a touch button, when pressed, the 1-wire bus will be shorted to ground and the device will emit a sound. MD-UDG is also equipped with a LED which lights up red when the reader is connected to the power supply. Feeding the control input (yellow wire) with voltage from 3 V to 14 V causes the color to change to green. The reader works with the voltage from 7 V to 25 V. Housing version in gray .

MW-UDG RFID wall reader

MW-UDG RFID wall reader.

Reader pins Reader pins.

Leads of the Netronix MW-UDG RFID wall reader

The MW-UDG wall reader from Netronix uses the 1-wire bus to transmit IDs from transponders. The device is equipped with 4-wires:

  • brown - power supply from 7 V to 25 V
  • white - mass
  • green - 1-wire (data output) / UART TX (bootloader)
  • yellow - LED / UART RX control input (bootloader)

Specification of the Netronix MW-UDG RFID reader

  • Supply voltage: 7 V to 25 V
  • Current consumption: 120 mA (25 mA average)
  • Built-in antenna operating frequency: 125 kHz
  • Transponder reading speed: RF / 64 (1953 b / s)
  • LED color switching voltage: 3V to 14V
  • Reading range: up to 6 cm
  • Antenna: built-in
  • Interface: 1-wire (Dallas 1990)
  • Distance between fixing pins: 42 mm
  • Reader damage voltage: +/- 30V
  • IP protection class: IP54
  • Relative humidity: up to 95%
  • Working temperature: -20 ° C to 50 ° C
  • Housing color: gray
  • Dimensions: 83 x 44 x 14 mm

Set contains

  • MW-UDG RFID wall reader - 125kHz - gray
  • Pins and mounting screws
Kit contents Kit contents.

Frequency from 125 kHz
Frequency to 125 kHz

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Products from the same category

13.56MHz RFID/NFC Keychain Fob - 10pcs

The RFID/NFC identifier in the form of a keychain. Each chip has a unique 32-bit code. The device works at a small distance from the reader, the carrier frequency is 13.56 MHz...
Index: MOD-07052
Index: MOD-07052
Available
Check quantity
Regular price €2.40 Price €2.40

PN532 NFC/RFID 13,56MHz I2C/SPI module + card and a keychain

Board allows you to read and save data from RFID devices at 13.56 MHz frequencies. It also works with the NFC protocol. The module is based on PN532 system, it is powered with...
Index: MOD-08240
Index: MOD-08240
Available
Check quantity
Regular price €13.00 Price €13.00

RFiD keychain - 125kHz - 10szt.

The RFID identifier in the form of a keychain. Each chip has a unique code. The device works at a distance of 2 - 5 cm from the reader , the carrier frequency is 125 kHz....
Index: MOD-09413
Index: MOD-09413
Waiting for confirmation of delivery date
Regular price €2.54 Price €2.54

iButton code key 1-wire S0990-BK - compatible with DS1990A-F5 - black holder - 10pcs

The iButton code key in the form of a lozenge placed on a black holder. Each chip has a unique code. The device is detectable from a short distance from the reader. It...
Index: SSC-14854
Index: SSC-14854
Available
Check quantity
Regular price €13.00 Price €13.00

13.56MHz/125MHz RFID/NFC Keychain Fob - 10pcs

The RFID identifier in the form of a keychain. Each chip has a unique 32-bit code. The device works at a small distance from the reader, the carrier frequency is 13.56 MHz...
Index: MOD-07051
Index: MOD-07051
Available
Check quantity
Regular price €6.44 Price €6.44

REDWU supply voltage reducer 16V - 25V to 12V

Voltage reducer used in RFID installations. Enables reduction of DC voltage from 14V to 25V to 12V.
Index: NEX-17628
Index: NEX-17628
Available
Check quantity
Regular price €3.88 Price €3.88

RFID / NFC MiFare Classic sticker - 13,56MHz - Adafruit 362

The ID of the RFID /NFC identifier in the form of a sticker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02951
Index: ADA-02951
Available
Check quantity
Regular price €3.45 Price €3.45

RFID keychain S103N-BE - 125kHz - compatible with EM4100 - blue - 10pcs

The  RFID  identifier in the form of a blue keychain. Each chip has a unique code. It is equipped with a 64-bit of ROM memory. The device works at a small distance from the...
Index: SSC-14842
Index: SSC-14842
Available
Check quantity
Regular price €3.88 Price €3.88

NFC Tag - convex sticker AI-Speaker - square

Convex sticker with integrated NFC (Near Field Communication) module with a chip capacity of 144 bytes. The square tags can be repeatedly programmed and proximity-readable by...
Index: AIS-19730
Index: AIS-19730
Available
Check quantity
Regular price €1.09 Price €1.09

MiFare RFID/NFC Classic keychain - 13,56MHz - Adafruit 363

The RFID /NFC identifier in the form of a transparent key-chain, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from...
Index: ADA-02954
Index: ADA-02954
Available
Check quantity
Regular price €3.67 Price €3.67

RFID keychain S103N-GY - 125kHz - compatible with EM4100 - grey - 10pcs

The  RFID  identifier in the form of a grey keychain. It operates at a frequency of  125 kHz . Each chip has a unique code. It has 64 bits of ROM memory. The device works at a...
Index: SSC-14845
Index: SSC-14845
Available
Check quantity
Regular price €3.67 Price €3.67

NFC Tag - convex sticker AI-Speaker - round

NFC tag from AI-Speaker as a round, convex sticker. It can be recorded and read using proximity technology , e.g. with a mobile phone equipped with Near Field...
Index: AIS-18524
Index: AIS-18524
Available
Check quantity
Regular price €1.09 Price €1.09