- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
The charger charges both Ni-MH (nickel-metal hydride) and Ni-Cd (nickel-cadmium) rechargeable batteries. At the same time, it can charge 1 to 4 R6/AA or R03/AAA rechargeable batteries.
The product is a charger,the Ni-MH batteriescan be purchased separately.
Main features
- Battery detection - if the battery is incorrectly inserted, the LED will blink red.
- Start-up mode - When deep-discharged cells are inserted, the charger alternately charges the batteries and checks if it can still charge them. The red and green LEDs flash alternately.
- Preparation mode - When the batteries are heavily discharged, they should not be charged with a large current, so the batteries go into preparation mode. The entire system is microprocessor-based. The LED flashes green.
- Charging mode - when sufficient battery voltage is reached, pulse charging starts. The charger itself controls the state of the cells, measuring their voltage. The LED lights up red.
- Back-up mode - when the cell is fully charged, the charger automatically goes into back-up mode. The LED lights up green.
Specification
- Charger type: intelligent
- Power supply: 230 V / 50 HZ - mains
- Cell size: AA (R6), AAA (R03)
- Cell type: Ni-MH, Ni-Cd
- Number of channels: 4
- Number of cells charged simultaneously: 1 to 4
- Detection of broken cells
- Detection of alkaline batteries
- Protection against polarity change
- The charging current: 1,4 V / 500 mA ±10%
- Backup current: 25 mA ±10%
- Operating temperature: 0 °Cto 25 °C
- Storage temperature: -25 °Cto 60 °C
- Dimensions: 105 x 70 x 65 mm
- Weight: 219 g
