- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
Module with built-in RGB colour sensor - KPS-5130. Enables detection of surface colour. It has a voltage amplifier to facilitate the measurement of analog signals and two white LEDs to illuminate the tested surface.The output is analogue signals - separate for each RGB component.
Specification .
- Supply voltage: 3.3 V to 5 V
- KPS-5130 photodiode color sensor(documentation)
- Built-in voltage amplifier
- Output signal: analogue (individual RGB components on separate pins)
- Built-in LEDs to illuminate the test surface
- Jumper for LED switch-off
- Goldpin connectors for self-soldering included
- Two mounting holes
- Dimensions: 21 x 19 mm
Connection
The device has a 5-pin connector. The output signal can be led e.g. to analog inputs ofArduino module. The sensor has the following outputs:
Analogue color detector - top view.
|
Name |
Description |
|---|---|
|
VDD |
Supply voltage from 3.3 V to 5 V. |
|
R |
Analogue signal of the red component. |
|
G |
Analogue signal of the green component. |
|
B |
Analogue signal of the blue component. |
|
GND |
The weight of the system. |
Useful links |
