- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
RPi Zero GPIO extensions and HAT - Strona 2
Loading...
HiFiBerry DAC2 ADC Pro - sound card for Raspberry Pi
HiFiBerry DAC2 ADC Pro is a professional sound card for Raspberry Pi , combining a high-end digital-to-analog converter (DAC) and analog-to-digital converter (ADC) . It...
Index: RHF-25546
Index: RHF-25546
HiFiBerry DAC2 Pro - sound card for Raspberry Pi 4B/3B+/3B
High quality sound card with digital-analogue and analogue-digital converter for Raspberry Pi 4B/3B+/3B. It is equipped with a Burr-Brown 192 kHz / 24-bit converter. On the...
Index: RHF-18129
Index: RHF-18129
Logic level converter 3,3V / 5V - I2C UART SPI
The module allows to exchange data between systems that use two popular voltages: 3.3 V and 5 V. It provides connection of interfaces: UART, SPI and I2C.
Index: MOD-01513
Index: MOD-01513
RPi Relay Board (B) IC Test Board - Waveshare 15275
Shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of up to 16 servos. It communicates via I2C interface and is based on PCA9685 system.
Index: WSR-13309
Index: WSR-13309
The module enables easy connection of all GPIO Raspberry minicomputer outputs in versions 4, 3, 2 and B+ with any contact plate without the need for soldering. The chip is...
Index: ADA-02781
Index: ADA-02781
Proto Hat to Raspberry Pi 4B/3B+/3B/2B
Board allows for independent creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MOD-09422
Index: MOD-09422
HiFiBerry DAC+ ADC Pro - sound card for Raspberry Pi 4B/3B+/3B
Sound card in the form of a 40-pin overlay for the Raspberry Pi minicomputer version 4B / 3B+ / 3B and above. Overlay powered directly from the minicomputer. It is equipped...
Index: RHF-16965
Index: RHF-16965
PCF8591 - A/D and D/A converter, 8-bit I2C v2
Module with A/D converter - 4 channels and D/A - 1 output. It works with voltage from 2.5 V to 6.0 V, and communicates over I2C. The board also contains: potentiometer,...
Index: MOD-02632
Index: MOD-02632
MCP3424 - ADC 18-bit 4-channel I2C converter
Module with analog-digital converter, delta-sigma type with 18-bit precision. It is equipped with four channels with differential inputs. It works at speed of up to 240 samples...
Index: DFR-03036
Index: DFR-03036
Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664
IQaudIO DAC+ - sound card for Raspberry Pi 4B/3B+/3B
The sound card designed for the Raspberry Pi minicomputer provides high quality Full HD 24-bit/192 kHz audio with built-in hardware volume control via the Linux built-in...
Index: RPI-18615
Index: RPI-18615
Ethernet / USB (B) HUB - 3xUSB 1xRJ45 Ethernet - frontend Overlay for Raspberry Pi - Waveshare 20416
Overlay for Raspberry Pi, adding three USB ports and one RJ45 Ethernet port. It has an embedded Ethernet RTL8152B chip. The pogo pin layout allows the overlay to connect...
Index: WSR-20080
Index: WSR-20080
OnOff SHIM - on / off switch - overlay for Raspberry Pi
OnOff SHIM is a shield for the Raspberry Pi, mounted on the GPIO connectors. After disconnecting the power supply to the micro USB port on the shield, you can turn on and off...
Index: PIM-10633
Index: PIM-10633
HiFiBerry Digi2 Pro 2.2 - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
HiFiBerry Digi2 Pro 2.2 is a Hat overlay sound card for Raspberry Pi versions 4B / 3B+ / 3 / 2 / B+ / A+ and Zero. Manufactured by HiFiBerry , it features a high quality...
Index: RHF-19063
Index: RHF-19063
ADC 16-bit converter - 4-channel ADS1115 - overlay for Raspberry Pi
Shield for Raspberry Pi with analog-digital converter of 16-bit accuracy and a small package MSOP-10. It has programmable data transfer speed from 8 to 860, 4 analog inputs and...
Index: MOD-09861
Index: MOD-09861
HiFiBerry Amp2 amplifier of class D 60 W for Raspberry Pi 4B/3B+/3B/2/B+/A+
Cap type Hat for Raspberry version 4B, 3B+, 3B, 2B, A+, B with a built-in class D amplifier with power of 60 W. The device supports speakers with an impedance of 4 Ω to 8 Ω,...
Index: RHF-09886
Index: RHF-09886
Cap HAT GSM / GPRS / GNSS / Bluetooth for Raspberry Pi - Waveshare 13460
Cap adjusted to the GPIO connectors for Raspberry Pi 3 / 2 / Zero / Zero, which provides connection through standard GSM, GPRS, GPS and Bluetooth. Allows voice chat, to send...
Index: WSR-09893
Index: WSR-09893
The module with the HAT shield for Raspberry Pi is equipped with eight HLS8L relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system...
Index: WSR-13301
Index: WSR-13301
UPS HAT for Raspberry Pi Zero - Waveshare 19739
The UPS overlay provides uninterrupted power to the Raspberry Pi Zero minicomputer, thanks to the Li-Pol battery, when the power from the Raspberry Pi Zero power supply...
Index: WSR-19717
Index: WSR-19717
LiPo SHIM - power supply extension for Raspberry Pi
LiPo PWM is an extension for Raspberry Pi mounted directly on the GPIO connector of the minicomputer. The device has JST 2.0 mm 2-pin connectors for connecting the...
Index: PIM-10634
Index: PIM-10634
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
Serial Expansion HAT - I2C, UART, GPIO for Raspberry Pi - Waveshare 15667
Shield with system SC16IS752 expanding the minicomputer Raspberry Pi with additional two communication channels of UART and GPIO ports programmable via I2C.
Index: WSR-13469
Index: WSR-13469
The cap for the Raspberry Pi containing 3-axis gyroscope, accelerometer, magnetometer and a barometer, temperature and humidity sensor, the LED matrix and a small joystick. The...
Index: RPI-04585
Index: RPI-04585
RPi Relay Board - 3 relays - cap for Raspberry Pi - Waveshare 11638
Cap fitted to connectors of Raspberry Pi GPIO in version 4B, 3B+, 3B, 2B, B+ and A+, with three relays with parameters of 250 V / 10 A. Board has a screw connector....
Index: WSR-06804
Index: WSR-06804