SparkFun Thing Plus - DA16200 - WiFi - SparkFun WRL-19696

Index: SPF-22066
Another board from the manufacturer SparkFun from the Thing Plus series, this time equipped with the DA16200 chip, which allows WiFi communication in the 802.11 b/g/n standard, making it ideal for IoT projects. The Thing Plus board is compatible with the Feather series and is equipped with a Qwiic connector, which means that connection with the rest of this ecosystem does not require soldering. On the module you can also find a Li-Pol battery connector, many GPIO pins and JTAG debugging pins. The board works with a voltage of 3.3 V.
SparkFun Thing Plus - DA16200 - WiFi - SparkFun WRL-19696
€24.50
€19.92 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: SparkFun

Product description: SparkFun Thing Plus - DA16200 - WiFi - SparkFun WRL-19696

Another board from the manufacturer SparkFun from the Thing Plus series, this time equipped with the DA16200 chip, which allows WiFi communication in the 802.11 b/g/n standard, making it ideal for IoT projects. The Thing Plus board is compatible with the Feather series and is equipped with a Qwiic connector, which means that connection with the rest of this ecosystem does not require soldering. On the module you can also find a Li-Pol battery connector, many GPIO pins and JTAG debugging pins. The DA16200 supports TCP/IP and the entire network operating system, so no external network processor, central processing unit or microcontroller is required. It is also equipped with WiFi Alliance certification for IEEE802.11b/g/n, WiFi Direct and WPS. The board works with a voltage of 3.3 V.

SparkFun Thing Plus DA16200

SparkFun Thing Plus - DA16200 - WiFi - SparkFun WRL-19696.

The manufacturer has prepared a detailed user's guide, in which you can find e.g. a detailed description of the pins and sample programs using the board. Check!

An example of connecting to a Qwiic sensor Connection example with Qwiic sensor (not included).

The main features of the DA16200 chip

  • 16 GPIO pins:
    • 4x 12-bit ADCs
    • 2x UARTs
    • SLEEPS
    • I2C
  • 28 PTH pins
  • USB Type-C connector
  • JST 2-pin connector for connecting the Li-Pol battery
  • Qwiic 4-pin connector
  • LEDs:
    • PWR - red, power status 3.3 V
    • CHG - yellow, battery charging status
    • STAT - blue, status / test (GPIO 4)
  • Button: IOC7
  • PTH JTAG/SWD pins

Thing Plus board specification

  • Chip: DA16200
  • Supply voltage: 2.1 V to 3.6 V
  • Operating temperature: -40°C to 85°C
  • Processor: ARM Cortex M4F clocked from 30 MHz to 160 MHz
  • ROM memory: 256KB
  • SRAM memory: 512KB
  • OTP memory: 2KB
  • SRAM retention: 48 kB
  • WiFi:
    • IEEE 802.11 b/g/n, 1x1, 20MHz, 2.4GHz (up to 54Mbps)
    • IEEE 802.11 b/g/n WiFi mesh
    • security: WPA / WPA2-Enterprise/Personal, WPA2 SI, WPA3 SAE and OWE
    • operating modes: Station, SoftAP, WiFi Direct Modes (GO, GC, GO fixed)
  • RTC chip (±250ppm)
  • Three ultra-low power sleep modes:
    • current consumption in sleep mode: 3.5 µA
  • Two mounting holes
  • Dimensions: 58.4 x 22.8mm

Kit contents

  • SparkFun Thing Plus - DA16200 - WiFi - SparkFun WRL-19696
Module with WiFi Module with WiFi DA16200 chip.

Package width 2.5 cm
Package height 6 cm
Package depth 1 cm
Package weight 0.008 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: