Filament Fiberlogy Impact PLA 1,75mm 0,85kg - Olive Green
Index: FLA-24998
- New
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
List of products by brand OEM - Strona 167
Loading...
NTC 110 10kΩ thermistor with 1m wire
Thermistor of NTC type with a resistance of 10 kΩ. The connecting cable has a length of 1 meter.
Index: SES-04943
Index: SES-04943
- EOL
HDMI - DVI-D cable allows you to connect devices with HDMI and DVI-D outputs in full HD mode. Cable length is 3 m.
Index: KAB-04976
Index: KAB-04976
- EOL
Universal USB splitter used to charge most phones, such as Nokia, Sony, Samsung, Motorola and other devices. The device works only as a charger, does not have a data line.
Index: KAB-05019
Index: KAB-05019
- EOL
GlobalTop GPS receiver module GPS-GMM-R1
Miniature module of the GPS receiver based on chipset MT3337 in the surface soldered case - SMD, with no built-in antenna.
Index: UCC-05039
Index: UCC-05039
- EOL
The adapter to instal the microSIM card (12 x 15mm) in a standard SIMcard slot (15 x 25 mm). It facilitates the moving the SIM card between different phones.
Index: MOD-05049
Index: MOD-05049
- EOL
Power supply 12V/1A - DC plug 5,5/2,5mm - black
Stabilized power supply. Power supply voltage: 230 V. Output voltage: 12 V DC. Output current: 1 A. Connector: DC plug 5.5 / 2.5 m.
Index: ZAS-05045
Index: ZAS-05045
- EOL
Hoverdrone Nano 2.4GHz drone hexacopter - 12cm
Quadrocopter with 6-axis gyro stabilization system. You can use it indoors and outdoors within approx. 40 meters range. The model is controlled by the control unit with a...
Index: ROB-05089
Index: ROB-05089
- EOL
Drone quadrocopter LH-X10WF 2,4GHz with FPV camera - 32cm
Quadrocopter with 6-axis gyro stabilization system. You can use it indoors and outdoors within approx. 80 meters range . The model is controlled by the control unit with a...
Index: ROB-05101
Index: ROB-05101
- EOL
Power Supply Blow 3x USB 5V 4,8A
Power supply with three USB type A outputs. Output voltage is 5 V, maximum current capacity is 4.8 A.
Index: ZAS-05115
Index: ZAS-05115
- EOL
Power supply 12V/1A - DC plug 5,5/2,5mm - white
Stabilized power supply. Supply voltage: 100 V to 240 V. Output voltage: 12 V DC. Output current: 1.0 A. Connector: DC 5.5 / 2.5 mm straight plug (compatible with 2.1 mm).
Index: ZAS-05162
Index: ZAS-05162
- EOL
Bridge rectifier KBPC2510 - 1000V / 25A - with pins
Bridge rectifier, maximum working voltage 1000 V, current to 25 A . It has outputs in the form of wires.
Index: PAS-05219
Index: PAS-05219
- EOL
Bridge rectifier KBPC5010 - 1000V / 50A - with pins
Bridge rectifier, maximum working voltage 1000 V, current up to 50 amps . It has outputs in the form of wires.
Index: PAS-05220
Index: PAS-05220
- EOL
Motion detector PIR ST41 1200W
PIR sensor detects movement. It is designed for installation in suspended ceilings. The detection angle is 360° and the maximum range is 6 m. The sensor can switch on devices...
Index: MOD-05198
Index: MOD-05198
- EOL
HDMI 1.4 Black 1080p 1,5m cable
HDMI allows you to connect in accordance with the standard, audio and video devices, including the Rasbperry Pi. The cable in version 1.4 supports resolution up to Full HD,...
Index: KAB-05249
Index: KAB-05249
- EOL
The ESP8266 chip for communication for the wi-fi network in the 2.4 GHz band. It is powered with the voltage from 3 V to 3.6 V, it is available in surface soldered - SMD QNF32.
Index: MOD-05390
Index: MOD-05390
- EOL
Set of electro-technical crocodile clips 70A - 2 pcs
A set of two wires ended on one side with the ring connector and on the other with a technical crocodile clip. It is used, for example, for charging a car battery.
Index: KAB-05378
Index: KAB-05378
- EOL
A device for removing tin excess. It has a case diameter of 25 mm, the total length is 200 mm.
Index: LUT-05567
Index: LUT-05567
- EOL
Yellow Board ESP8266 - WiFi module ESP-12E + battery holder
Board with the wifi ESP-12E module with connectors in the form of goldpin pins. Led out are 9 GPIO 1 analogue input and RX, TX, RESET, CH_PD pins, power supply and ground. Also...
Index: MOD-05594
Index: MOD-05594
- EOL
Adapter plug DC 5.5 / 2.1 - plug 6F22 battery 9V
Adapter that allows you to connect popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development kits, for example, Arduino.
Index: AKC-05674
Index: AKC-05674
- EOL
A container for storing batteries or accumulators. Prevents accidental short circuit. Designed for AA type batteries (sticks).
Index: NSZ-05673
Index: NSZ-05673
- EOL
Power supply for LED strip 12V/2.1A/25W
Stable, switched-mode industrial power supply for powering LED strips. Supply voltage: 100 V to 240 V. Output voltage: 12 VDC. Output current of 2.1 A. Features a screw.
Index: ZAS-05667
Index: ZAS-05667
- EOL
Power supply for LED strip AN-24-12 12V/2A/24W
Stabilized, mounting power supply unit for supplying LED strip. Supply voltage: 87 V to 264 V. Output voltage: 12 V DC. Output current: 2 A. Equipped with screw connectors.
Index: ZAS-05664
Index: ZAS-05664
- EOL
Power supply for LED srtrips 12V / 30A / 360W
Stable, switched-mode industrial power supply for powering LED strips. Supply voltage: 100 V to 250 V Output voltage: 12 VDC. Output current: 30 A. Equipped with a screw.
Index: ZAS-05668
Index: ZAS-05668
- EOL
THT CF carbon resistor 1/8W 330Ω - 30pcs.
A set of 30 resistors with the 1/8 W power. Elements are in the through hole THT case.
Index: PAS-05690
Index: PAS-05690
- EOL