- New
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
iNode MCU Relay - Bluetooth 4.1 and WiFi - for iNode Care Sensor
Index: INO-21204
- On sale!
- Promotion
List of products by brand OEM - Strona 168
Loading...
RGB LED strip WS2821 IP65 36 LED/m, 9W/m, 24V - 5m
Individually addressed RGB LEDs placed on a 5 m panel with a density of 36 LEDs per meter. Each pixel consisting of three RGB LEDs can emit a color from 24-bit palette. The...
Index: LED-05815
Index: LED-05815
- EOL
JST socket, straight 1,5mm raster - vertical
2-pin connector, type JST - easy to to solder on the PCB. Used in small li-pol batteries. The pitch is 1.5 mm.
Index: KAB-05852
Index: KAB-05852
- EOL
Optotriac MOC3063 600V/0.05A - THT
The driver is designed to work with mains voltage. Voltage Vdrm: 600 V, current It: 5 mA. The case: DIP-6 . It has a built-in module switch in zero.
Index: UCC-05984
Index: UCC-05984
- EOL
RCA female angle socket THT with red mark
RCA corner female slot with a red mark. It has THT pins for THT mounting in the PCBs.
Index: KAB-05991
Index: KAB-05991
- EOL
Female header 1x50 SMD 2,54mm raster
Single-row, female, 1x50 surface-soldered strap. Pins pitch: 2.54 mm.
Index: KAB-06028
Index: KAB-06028
- EOL
Ultrasonic cleaner 0.7l 35W EMK-998
Ultrasonic cleaner for repair and maintenance of electronic components, cleans using ultrasound in remote places. The device has a capacity of 700 ml and power of 50 W.
Index: LUT-06082
Index: LUT-06082
- EOL
Brushless motor controller for current up to 6 A. The optimum power supply is the 2S - 3S li-pol packages (7.4 V to 11.1 V). It has a 5 V / 2 A BEC regulator.
Index: MOD-06106
Index: MOD-06106
- EOL
Power supply 5V/1,2A - DC 5,5/2,5mm
Stabilized power supply. Mains supply: 110 V to 240 V. Output voltage: 5 V DC. Output current: 1.2 A.
Index: ZAS-06285
Index: ZAS-06285
- EOL
Jack 3,5mm - 2x Jack 3,5 mm - 1,5m
Cable is used for audio signal transfer. It has 3.5 mm jack plug and two jack slots of 3.5 mm. It allows you to connect headphones and a microphone to laptop with single audio...
Index: KAB-06356
Index: KAB-06356
- EOL
Unipolar stepper motor, six wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 12 V and draws 400 mA current per coil. The torque is 2.6...
Index: MOT-06425
Index: MOT-06425
- EOL
Car Horn - 12V/3A/110dB - 2pcs
Very loud car horn powered by 12 V with current consumption up to 3 A. It emits a sound level of 110 dB.
Index: MOD-06468
Index: MOD-06468
- EOL
Converter ADC MCP3204-CI/P 12-bit 4-channel SPI - DIP
12-bit, 4-channel converter ADC MCP3204-CI/P in a DIP case with communication interface SPI.
Index: UCC-06509
Index: UCC-06509
- EOL
USB Car Charger - Blow G63 5V/6,3A 3xUSB
Power supply for car socket with USB output with a total current of 6.3 A. The output voltage is 5 V.
Index: ZAS-06471
Index: ZAS-06471
- EOL
LED RGB strip driver with IR remote - 44 keys
A module that allows you to control the brightness of monochrome panel with LED backlight and brightness and LED RGB color panel. It has lots of preset functions. Equipped with...
Index: LED-06489
Index: LED-06489
- EOL
Music Sound Card Virtual 7.1 Channel USB - Jack - Raspberry Pi 4B/3B+/3B/2B/B+
USB sound card with Virtual 7.1 CH control with two audio inputs and two outputs. It also works with minicomputers Raspberry Pi.
Index: RPI-06705
Index: RPI-06705
- EOL
Bipolar transistor NPN BF241 40V/0.025A - 5pcs
Bipolar transistor NPN, 40 V, 0.025 amps. Pinout: CEB. Price for 5 pieces.
Index: UCC-06916
Index: UCC-06916
- EOL
Solar panel 0,6W / 6V 112x91x3mm
A 0.6 W solar cell with an output voltage of 6 V. The dimensions of the plate are: 112 x 91 x 3 mm. The outputs are pads for solder cables.
Index: AKU-06987
Index: AKU-06987
- EOL
D1 R2 WiFi ESP8266 - compatible WeMos and Arduino
The module is compatible with Arduino, based on ESP8266. It has the ability to connect to wi-fi, and 11 digital inputs/outputs, 10 channels of PWM, 1 analog input, as well as...
Index: MOD-06953
Index: MOD-06953
- EOL
Solar panel 5W/6V w ramce 255x147x2mm Flex
A 5 watt solar cell with an output voltage of 6 volts made of flexible Flex material. Dimensions of the module are: 255 x 147 x 2 mm. Connectors are pads for soldering wires.
Index: AKU-06991
Index: AKU-06991
- EOL
Power supply S-120W-12V for LED Strip 12V/10A/120W
Stabilized, switched mode, modular power supply for powering LED strips. Voltage: from 110 V to 240 V. Output voltage: 12 VDC. Output current: 10 A. Equipped with a terminal...
Index: ZAS-07003
Index: ZAS-07003
- EOL
Power supply W-36W-12V for LED strip - 12V/3A/36W - waterproof IP67
Waterproof, stable power supply for powering LED strips. Supply voltage: 90 V to 250 V, output voltage: 12 VDC. Output current: 3 A. Connection: loose wire with removed...
Index: ZAS-07005
Index: ZAS-07005
- EOL
The holding electromagnet powered with the voltage of 24 V with a power of 3 W. It holds a weight of 2.5 kg in standard earth acceleration of 9.8 m/S2. Case diameter is 20 mm,...
Index: MOD-07026
Index: MOD-07026
- EOL
Light control sensor MCE34 - 2000W
The sensor is used to turn on and off lights depending on the brightness level of the environment. Its operation i not influence neither by the temperature nor by the...
Index: MOD-07010
Index: MOD-07010
- EOL
Pololu Motor Mount MT90/MT100 - 36,5mm
Mount for MT90 / MT100 motors. It is made in the technology of 3D printing.
Index: MOD-07211
Index: MOD-07211
- EOL