List of products by brand OEM - Strona 188
Speaker YD20 0.25W 8Ohm - 20x8mm
A loudspeaker with 0.25 W, 8 ohm resistance and 20 x 8 mm dimensions.- EOL
Battery for drone Dromid Kodo - Li-Pol 390mAh 1S 3,7V
3.7V lithium-polymer battery with a capacity of 390 mAh, dedicated to Dromid Kodo quadropter. Weight 11 g, dimensions 39 x 19 x 7 mm.- EOL
Tact Switch 12x12mm with a cap - long black
Push button size 12x12 mm, cap height: 9.5 mm, cap diameter: 8,5 mm, cap colour: black.- EOL
Set of socket wrenches and ratchet screwdrivers - 18 elements
Set of screwdrivers and socket wrenches with ratchet and extension. Contains 10 screwdrivers, 7 socket wrenches and a ratchet head.- EOL
Male adapter RP-SMA - U.FL - 20cm - discontinued
Adapter for 2.4 GHz U.FL antennas - RP-SMA (male), 20 cm long.- EOL
Foam tape, double-sided, 15mm x 10m
Foam tape, self-adhesive, double-sided 15 mm x 10 m.- EOL
Ceramic condenser 68pF/50V THT - 10pcs
68 pF / 50 V ceramic screwed through capacitor. Price for 10 pieces.- EOL
Ceramic condenser 15nF/50V THT - 10 pcs
Through hole ceramic capacitor of 15 nF / 50 V. Price for 10 pieces.- EOL
Redox PRO16 power supply 14V/16A
Powerful and powerful power supply unit. Power supply voltage: AC 100 V - 240 V. Output voltage: 14 V DC. Output current: up to 16 A. The unit is equipped with a digital display.- EOL
Carbon monoxide sensor XC20 - 230V
Sensor that detects the concentration of carbon monoxide (Chad - CO) in the air. It is powered by 230 V. It is used to warn against this dangerous gas by means of an acoustic...- EOL
Blue Pro Micro 5V/16MHz - compatible with Arduino
Module based on the Arduino Leonardo, is characterized by small size. Has the microcontroller AVR Atmega32U4. Equipped with 12 digital inputs/outputs and with popular...- EOL
TFT LCD display 2,2'' 240x320px - SPI
2.2" LCD TFT graphic display with 240 x 320 px resolution. It works with a voltage of 3.3 V and communicates via the SPI bus. Additionally, the board has a microSD memory card...- EOL
Network socket 2300W - remote control activated switch - 4 pcs.
Mains socket 230 V with a power of 2300 W controlled remotely using a remote control or with a button. The device requires no installation, remote control supports up to 4...- EOL
250V/2,5A On-Off Switch with cord
On-Off switch with cord and screw connections. The load capacity of the contacts is 250 V / 2.5 A.- EOL
Ozone sensor MQ-131 - black module
Ozone sensor module MQ-131 with 2.54 mm goldpin raster leads. It is powered by 5 V. It has digital and analog outputs, which makes it compatible with most of the starter...- EOL
Converter RS232 - UART with DB9 connector for Banana Pi
RS232 serial interface converter to UART standard. It has a 9-pin D-SUB socket. The implementing circuit is the popular MAX232, the connectors are matched to the Banana Pi...- EOL
Extension of pins 74HC595 SPI to Banana Pi
The extension allows to increase the number of Banana Pi digital outputs by 32 one-way I/O pins. It communicates via SPI bus, uses 74HC595 circuits.- EOL
WiFi module ESP-03 ESP8266 - 7 GPIO, ceramic antenna
WiFi module based on ESP8266 chip. It operates in 802.11 b/g/n WiFi standard at 2.4 GHz. It is equipped with 14 outputs - 2 mm raster, 7 of which are GPIO and 1 ADC. It has a...- EOL
Loudspeaker YD66 0,5W 8Ohm - 66mm
Loudspeaker up to 0.5 W, 8 ohm resistance and 66 mm diameter.- EOL
TFT LCD touchscreen 2,8'' 240x320px
2.8" LCD TFT touch screen graphic display with 240 x 320 px resolution. It works with a voltage of 3.3 V, communicates through the SPI bus - 40 pin socket. Additionally, the...- EOL
Li-Pol 300mAh 3,7V battery - 3 wires - 2mm connector
Single cell li-pol battery with 3.7 V and 300 mAh capacity. It has a built-in PCM system to protect against overload, over-discharge and short circuit.- EOL
LED holder 3mm - plastic concave
LED holder 3 mm, made of plastic. The subject of sale is the holder, LEDs can be purchased separately.- EOL
- EOL