- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 868MHz LoRaWAN Network Gateway - SenseCAP M1 Indoor Gateway - Seeedstudio XNM1EU868
SenseCAP M1 is a powerful, ready-to-use LoRaWAN indoor gateway compatible with the Helium LongFi Network. The product enables you to connect to The People's Network in just a few simple steps. The SenseCAP M1 enables the creation of LoRa applications at a low cost. It also provides access to wide wireless coverage and data bandwidth for LoRa / LoRaWAN devices. It helps the user join The People's Network infrastructure, enabling the benefits of participating in the Helium community.
SenseCAP M1 follows No Return, No Refund policy except for quality defects, according to the manufacturer's termsand conditions. Please do not register to Helium and assert location until you make sure the device is working good.
The gateway is designed for indoor use.
SenseCAP M1 main functionality.
Features of SenseCAP M1
- Quick configuration of the Helium network involving only 6 steps
- Based on popular hardware solutions: Raspberry Pi 4B and WM1302 / WM1303 (Semtech SX1302 / SX1303)
- Secure and reliable: onboard ECC608 cryptographic chip, high-security authentication and reliable connectivity
- Automatic OTA updates, no manual operation
- Built-in remote diagnostics, powerful online support
- Generous 64 GB microSD memory card
- Aluminum case with heat sink and fan for efficient cooling
Hardware solutions
As a LoRaWAN gateway, the SenseCAP M1 features high performance. It is based on a Raspberry Pi 4B and embedded in a LoR WM1302 / WM1303 (Semtech SX1302 / SX1303) hub. It offers multi-mile range and very low power consumption at the same time.
Construction of the LoRaWAN SenseCAP M1 gateway.
SenseCAP M1 Indoor Gateway.
Supported frequency bands and communication security
For the European market, the manufacturer has made available the CE-certified EU868 version. The device has an embedded ECC608 cryptographic chip that provides highly secure authentication, ensuring effective protection of the SenseCAP M1.
Automatic updates and remote diagnosis mechanism
The SenseCAP M1 provides system and OTA software based on the Docker platform. It enables automatic online updates without any activation or monitoring. A 64 GB microSD card provides enough space for future update packages. A remote diagnostics mechanism is built into the SenseCAP M1, enabling online support on demand for any problems with the device.
Diagram of the system components.
Efficient cooling of the SenseCAP M1 Indoor Gateway.
Efficient cooling of components
SenseCAP M1 is equipped with an aluminum heat sink and a cooling fan in an aluminum case. Two types of cooling, passive and active, enables long-term, stable operation of the device.
Simple configuration
The SenseCAP M1 is very convenient to use. Place the device next to a window or attach it to a wall. When using several gateways, it is recommended that they be placed 350-400 metres apart from each other to extend the range of the network. SenseCAP M1 is a Helium compatible gateway with built-in Bluetooth. It can be easily set up using the Helium app on your smartphone in minutes by following 6 simple steps. SenseCAP M1 supports WiFi or Ethernet connection.
Getting started with SenseCAP M1
- Download the Helium app from Google Play or the App Store and create a wallet
- Connect the antenna and power adapter, turn on the SenseCAP M1 device
- Press and hold the button on the back of the case for 5 seconds until the LED starts blinking slowly
- Configure the hotspot and select SenseCAP M1 from the list
- Locate your device and connect to it
- Select WiFi and enter the password, to connect your device to the network.
SenseCAP M1 Setup Steps.
SenseCAP M1Indoor Gateway kit components.
SenseCAP M1 specifications
- Voltage: 5 V / 3 A
- Controller chip: Raspberry Pi 4
- Processor chipset: Broadcom BCM2711 64-bit
- Core: Quad Core ARM Cortex-A72
- Clock speed: 1.5 GHz
- SD memory card: 64 GB
- Frequency: EU868 version: 863 MHz to 870 MHz
- Sensitivity: 125 dBm @ 125 kHz / SF7
- Transmitter Power: up to 26 dBm
- EU868 antenna gain: 2.8 dBi
- Antenna impedance: 50 Ω
- Antenna type: Omni-directional
- WiFi: IEEE 802.11ac 2.4 GHz and 5.0 GHz wireless network
- Bluetooth: Bluetooth 5.0 BLE
- LoRaWAN: Class A, C support
- Communication: USB type C, RJ45 Ethernet, RP-SMA female antenna connector
- Operating temperature: 0°C to 50°C
- Relative humidity: 0% to 90%
- IP rating: IP 20
Contents of the kit
- SenseCAP M1 Indoor Gateway
- Fiberglass antenna
- Power supply
