• EOL

Raspberry Pi Model B+ 512MB RAM

Index: RPI-02543 EAN: 6405227101648

The latest version of the popular minicomputer Raspberry Pi, version B+. In addition to the already well-known processor Broadcom SoC with a clock frequency of 700 MHz, 512 MB of RAM and microUSB connector, the board includes, i.a. four USB slots, additional 14 GPIO (together - 40), connector for microSD card and four mounting holes.

Raspberry Pi Model B+ 512MB RAM
€43.90
€35.69 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

The product is available on special order. To check the availibility, please contact us by email:[email protected]

Raspberry Pi 3 model B - już dostępne

Check the available, latest version of the Raspberry Pi 3!


Description of the Raspberry Pi B+

New version of the popular minicomputer Raspberry Pi, model B+. The device can be an alternative for desktop computers. Its main advantages are: easy to use operating system, low energy consumption, small size, the performance of Pentium II and installed slots: 4 x USB, HDMI, Audio, GPIO pins, and microSD slot formemory cardand microUSB forpowering the system.

 

In our offer, you will finddedicated case forversion B+!

 

What's new in version B+?

  • 4 USB port replaced 2 of them.
  • 40 GPIO pins instead of 26
  • Slot for SD-cards is replaced with the slot for micro SD.
  • There is a new regulator step-down for voltages of 3.3 V and 1.8 V.
  • Improved was the sound quality.
  • Composite slot (NTSC/PAL) was integrated with four field connector 3.5 mm jack.
  • Added were four mounting holes.
  • Changed was the placement of the connectors, the previous cases will not fit.
  • Added was reverse polarity protection of the supply voltage.

 

What hasn't changed?

  • Processor Broadcom CoS BCM2835 with a clock frequency of 700 MHz, graphic system and RAM - 512 MB.
  • Size: 86 x 56 mm
  • HDMI slot 1.4 is compatible with 1.3.
  • Power connector microUSB.
  • Software - previous operating systems will be compatible.
  • The first 26 GPIO pins are the same.
  • Connector for a dedicated camera.

 

The picture and sound

The Raspberry Pi has HDMI of version 1.4, through which you can send picture and sound. In addition, the board was equipped with a 4-pin Jack 3.5 mm to connect headphones, speakers or display video through a standard RCA Composite. In our assortment, you will find the necessary wire Jack - RCA.

Operating system

A drive of the raspberry is a microSD memory card. The operating system can be uploaded via the computer with the reader. In our store are available cards with the installed NOOBs software which with the first activation enables choosing from the systems: Raspbian, Pidora Openelec, RaspBMC, RISC OS, Aarch Linux.

 

Communication

Raspberry has the main communication interfaces which can be found in office computers of PC class. In addition to the previously listed connectors of audio and video, the user has at his or her disposal:

  • four USB connectors, to which you can connect, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB.
  • Ethernet connector, that is the ability to directly connect to the LAN network
  • GPIOoutputs/inputs with general purpose that can be used to control the LEDs, buttons, driversof  engines. Among them are the pins that support interfaces: I2C, SPI and UART. In version B+, the GPIO number was increased from 26 to 40.

 

Power

As a power source, the system uses the microUSB connector. In practice, this means that to run Rasbperry Pi, you can use the charger for mobile phones with current of at least 1 A.

 

Accessories compatible with the version of B+

Most modules that use connectors of the GPIO (with the exception of Audio, e.g. Wolfson) will still work correctly with the new version of the raspberry. Devices that use USB ports (e.g. wifi) and HDMI ports, will be compatible. To version B+, it is also possible, connecting a dedicated camera: standard, daily or Noir version without the UV filter.

 

 

Accessories that would not work with version B+

Audio shields which use additional connectors (led-out as solder pads), will not work with the new version. Attempt to plug-in the GPIO cable 26-pin, will end with the bending of the connectors of the Raspberry B+. Changed was also the distance between the slots so the existing cases are not compatible with the model B+.

 

UC - RAM 512 MB
UC - core 1. Single Core
UC - Digital pins 40
UC - External memory microSD card
UC - freq 0.7 GHz
UC - Ethernet yes
UC - USB 4x USB
UC - HDMI yes
UC - I2C yes
UC - UART yes
UC - Connector 5V microUSB
UC - SPI interface yes
UC - LCD interface yes
UC - Camera interface yes
UC - Linux yes
UC - Android no
UC - Windows no
Package width 0 cm
Package weight 0.07 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: