Drivers for DC motors - Strona 6
TB9051FTG Hat two-channel driver for motors 28V / 2.6A - shield for Raspberry Pi - Pololu 2761
Module with dual-channel driver of motors TB9051FTG working with voltages from 4.5 V to 28 V and current up to 2,6 A per channel (max 5 A). The system can be connected directly...A-Star 32U4 Robot Controller SV 36V/1.7A - extension to Raspberry Pi - Pololu 3119
Programmable system equipped with the famous from Arduino Leonardo, microcontroller Atmega32u4 with installed bootloader. It has dual driver of motors 36 V / 1,7 A and...M2T256 - two-channel motor controller 48V/1,8A - I2C interface - Pololu 5065
A driver based on the M2T256 system that allows you to control two DC motors using the I2C interface . The M2T256 can work with motors supplied with a voltage of 4.5 V to...Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - soldered - Pololu 5034
The Motoron M3H256 is a three-channel driver for DC motors manufactured by the Pololu company. Input voltage for powering DC motors should be in the range from 4.5 V to 48 V...High-Power Simple Motor Controller G2 24v12 - 40V/12A - mounted - Pololu 1364
Single channel powerful DC motor controller. It can be easily programmed via microUSB connector and dedicated application. Continuous current per channel is 12 A, motor supply...RoboClaw V5E 2x30A USB V5E - two-channel 34V/30A motor controller - Pololu 3286
A dual channel DC motor controller. It uses microUSB port, UART TTL interface, analog signal or RC radio interface for communication. It is powered from 6 V to 34 V, the...JRK G2 18v19 - single channel USB driver with 30V / 19A feedback - Pololu 3146
Extremely easy to use motor controller with feedback support. Available communication interfaces: USB, TTL, I2C, analog and radio. Supply voltage is from 6.5 V to 30 V...JRK G2 24v13 - single channel USB driver with 30V/19A feedback - Pololu 3147
Extremely easy to use motor controller with feedback support. Available communication interfaces: USB, TTL, I2C, analog and radio. Supply voltage is from 6.5 V to 40 V and...JRK G2 24v21 - single channel USB driver with 40V / 21A feedback - Pololu 3149
Extremely easy to use motor controller with feedback support. Available communication interfaces: USB, TTL, I2C, analog and radio. Supply voltage is from 6.5 V to 40 V and...RoboClaw V5E 2x45A USB V5E - two-channel 34V/45A motor controller - Pololu 3287
RoboClaw module allows to control two DC motors . It communicates via microUSB port, UART TTL interface, analog signal or RC radio interface. It is powered by voltage from 6 V...DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the...