Electric motors, to connect them with the control system – for example, the programmable control unit PLC or industrial PC jednopłytkowym such as the Raspberry Pi require a motor driver. The modules are available in our store a wide variety of settings, in versions with two or even szesnastoma control channels. Some two-channel motor driver DC, can also be used, e.g. for control of stepper motors, although this requires the implementation of control algorithm in the module monitor the operation of the driver.
- New
- Reduced price
- Promotion
- On sale!
- Promotion
Motor drivers modules
Loading...
DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 1.5 A). Power supply from 2.0 to 11 V.
Index: PLL-00851
Index: PLL-00851
Cytron MD20A - single-channel motor controller 30V/20A
Single-channel DC motor controller based on MOSFET transistors. Enables control of motor speed through PWM channel. Continuous current per channel is 20 A (momentary 60 A)....
Index: CTN-14000
Index: CTN-14000
DRV8801 - single-channel motor controller 36V / 1A - Pololu 2136
Single-channel DC motor controller. Continuous current per channel 1 A (momentary to 2.8 A). Supply voltage from 8 V to 36 V.
Index: PLL-01256
Index: PLL-01256
TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713
Pololu module with dual channel DC motor driver. It is powered from 4.5 V to 13.5 V. The continuous current per channel is 1 A, when both channels are connected the value...
Index: PLL-00032
Index: PLL-00032
Cytron MDD3A - dual-channel 16V / 3A motor controller
The Cytron MDD3A motor controller has the ability to control 2 DC motors or 1 stepper motor. Continuous current per channel is 3 A (momentary 5 A). Supply voltage is from 4 V...
Index: CTN-15819
Index: CTN-15819
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
Cytron MD10C - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A). Supply voltage from 5 V to 30 V .
Index: CTN-12397
Index: CTN-12397
DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.
Index: PLL-02695
Index: PLL-02695
L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the...
Index: MOD-08227
Index: MOD-08227
Haptic Motor Driver - DRV2605L - SparkFun ROB-14538
SparkFun module with DRV2605L haptic motor controller. It can handle ERM and LRA motors. Operates from 2 V to 5.2 V. Communicates over I2C bus.
Index: SPF-08219
Index: SPF-08219
MAX14870 - single-channel motor controller 36V/1.7A - Pololu 2961
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 2.5 A). Supply voltage from 4.5 V to 36 V.
Index: PLL-04200
Index: PLL-04200
L298N - two-channel motor controller - 12V/2A
Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...
Index: MOD-03164
Index: MOD-03164
Cytron Maker Drive MX1508 - two-channel motor controller 9.5V/1A
Simple to use, two-channel DC motor driver with H-bridge. 1 A continuous current per channel (1.5 A momentary). Power supply from 2.5 V to 9.5 V. Output current at 5 V is 0.2 A.
Index: CTN-13999
Index: CTN-13999
DFRobot - motor driver 5,5V/1,5A for BBC micro:bit
An overlay for micro:bit to control four DC motors , two stepper motors and eight servos (5.5V/1.5A). Additionally the module has 9 I/O pins Micro:bit.
Index: DFR-12359
Index: DFR-12359
Cytron SHIELD-2AMOTOR - 2-channel motor driver 26V/2A - shield for Arduino
Shield for Arduino with dual-channel DC motor driver operating with a voltage of 5 V to 26 V and current up to 2 A, based on the L298P circuit. The board has jumpers for...
Index: CTN-12404
Index: CTN-12404
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
Simple DC 28V/3A motor driver - module with knob
Extremely easy to use, single-channel direct current motor controller with speed control knob. The device works on the basis of PWM signal. Power supply voltage is from 8 V to...
Index: MOD-06906
Index: MOD-06906
Cytron Robot Combat Controller URC10 ATmega328P + driver engines 24V/10A compatible with Arduino
Dual-channel DC motor driver. The module can control the direction of rotation, start, stop and speed of the DC motors. Continuous current per 10 A channel (temporary 30 A)....
Index: CTN-12414
Index: CTN-12414
36v4 - High - Power Stepper Motor Driver 50V/6A - Pololu 3730
The DRV8711 stepper motor controller allows you to control one bipolar stepper motor. Powered from 8 V to 50 V, with a maximum current draw of 6 A per coil. Maximum...
Index: PLL-14787
Index: PLL-14787
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.
Index: DFR-07421
Index: DFR-07421
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
DFRobot HR8833 - two-channel driver for DC 10V/1,5A motors
A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.
Index: DFR-06934
Index: DFR-06934
DFRobot TB6612 - 4-channel motor driver 13.5V/1.2A - Shield for Arduino
The module allows you to control four DC motors (DC) using boards of the Arduino. The system allows you to adjust the direction and rotation speed of the motors with a current...
Index: DFR-07441
Index: DFR-07441
Integrated modules for motor control
Motor drivers modules are very popular in electronics, in particular to the design of prototype devices and for fans. Thanks to an integrated design module contains all the necessary circuits and discrete elements on a small printed circuit Board. Due to this the controller for this connection, only need a power source, the engine and, of course, control signals, for example, a computer or a microcontroller. Integrated motor drivers can be implemented in various designs such as compact robots or machines with small numbers.
A wide range of modules for motor control
The motors are typical a number of options under which you need to find motor drivers modules. In addition to intuitively understand the number of channels also have other settings, of which the most important is the voltage and operating current. Voltage range of work suggests that can be the rated voltage of the motors controlled by this module. Operating current specyfikuje the maximum allowable current supported by this driver, so it is important that the current consumption of this engine was no more than this value. Excess of maximum permissible parameters of the driver can fail the entire system.
Multi-channel drivers for use with minikomputerami
The assortment of our shop you can find motor drivers – multi-channel modules equipped with a dedicated interface for connection to PC jednopłytkowych such as a popular series of Raspberry Pi or Micro:bit for tile prototypes in the form shielda in the format of Arduino. Due to the fact that these modules can be connected to a wide range of minicomputers to focus on the fact that the format of the Arduino, as well as 40-pin connector of the Raspberry Pi, it's widely accepted in this sector, standards of signal receiving modules for developers.