- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
Direction switch and speed regulator for electric actuators - STE-02
Index: ELB-20039
- Reduced price
- Sale
Motor drivers modules - Strona 2
Loading...
DFRobot - motor driver 5,5V/1,5A for BBC micro:bit
An overlay for micro:bit to control four DC motors , two stepper motors and eight servos (5.5V/1.5A). Additionally the module has 9 I/O pins Micro:bit.
Index: DFR-12359
Index: DFR-12359
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451
ST's VNH5019 module operates from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).
Index: PLL-00456
Index: PLL-00456
G2 High Power 18v17 - single channel motor controller 30V/13A - Pololu 2991
Single-channel high-performance DC motor controller. Continuous current per channel is 17 A (momentary up to 100 A), motor supply voltage from 6.5 V to 30 V, logical part...
Index: PLL-05990
Index: PLL-05990
36v4 - High - Power Stepper Motor Driver 50V/6A - Pololu 3730
The DRV8711 stepper motor controller allows you to control one bipolar stepper motor. Powered from 8 V to 50 V, with a maximum current draw of 6 A per coil. Maximum...
Index: PLL-14787
Index: PLL-14787
DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 1.5 A). Power supply from 2.0 to 11 V.
Index: PLL-00851
Index: PLL-00851
DFRobot TB6612 - 4-channel motor driver 13.5V/1.2A - Shield for Arduino
The module allows you to control four DC motors (DC) using boards of the Arduino. The system allows you to adjust the direction and rotation speed of the motors with a current...
Index: DFR-07441
Index: DFR-07441
Cytron Robot Combat Controller URC10 ATmega328P + driver engines 24V/10A compatible with Arduino
Dual-channel DC motor driver. The module can control the direction of rotation, start, stop and speed of the DC motors. Continuous current per 10 A channel (temporary 30 A)....
Index: CTN-12414
Index: CTN-12414
TB6612 - two-channel 13.5V / 1.2A motor driver with connectors - Adafruit 2448
Dual-channel driver motors on the basis of the layout of the TB6612FNG . The voltage of the motors is d 4.5 V to 13.5 V and logic voltage ranges from 2.7 V to 5 V . The...
Index: ADA-15916
Index: ADA-15916
DRV8833 - two-channel motor controller 10,8V/1,2A - Pololu 2130
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 2 A). Power supply from 2.7 to 10.8 V.
Index: PLL-00546
Index: PLL-00546
MAX14870 - single-channel motor controller 36V/1.7A - Pololu 2961
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 2.5 A). Supply voltage from 4.5 V to 36 V.
Index: PLL-04200
Index: PLL-04200
VNH5019 2-channel motor driver 24V/12A - Shield for Arduino - Pololu 2507
Shield for Arduino with two drivers of DC motors VNH5019. The module operates with voltages between 5.5 V up to 24 V. Maximum continuous output current is 12 A (short-term: 30...
Index: PLL-02262
Index: PLL-02262
TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450
SparkFun module with two channel DC motor driver. It is powered from 2.7 V to 15 V . Continuous current per channel is 1.2 A. It has soldered goldpin connectors.
Index: SPF-10666
Index: SPF-10666
Cytron MDDRC10 - two-channel driver for DC 10A 7V-30V motors
Two channel DC motor driver with supply voltage from 7 V to 30 V . Continuous current consumption per channel is 10 A , and momentary 30 A . When the controller is switched...
Index: CTN-18994
Index: CTN-18994
The General Driver board is a multifunctional driver based on the ESP32-WROOM-32 module, which offers a wide range of possibilities and allows you to expand the project with...
Index: WSR-22832
Index: WSR-22832
M2T550 - dual motor controller 22V/1,6A - I2C interface - Pololu 5079
The controller from Pololu is based on the M2T550 system enabling the operation of two DC motors . It uses the I2C interface for communication. Works with engines powered...
Index: PLL-23643
Index: PLL-23643
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
24V/10A PWM/USB motor controller - DFRobot DRI0050
DC motor or LED strip driver, controlled via PWM interface. The driver allows you to adjust the speed of the motor or the brightness of the LED strip through the...
Index: DFR-20683
Index: DFR-20683
Cytron Shield-MDD10 - two-channel DC motor driver - 7V-30V/10A - Shield for Arduino
A module that allows you to control two DC motors or one stepper motor using Arduino. The overlay allows you to adjust the direction and speed of motors with current...
Index: CTN-14815
Index: CTN-14815
M3S550 - triple motor controller DC 22V/1,7A - for Arduino - soldered - Pololu 5068
Shield designed to work with Arduino, enabling control of three DC motors . It uses the I2C interface for communication. The controller supports motors powered with voltage...
Index: PLL-23649
Index: PLL-23649
DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.
Index: DFR-07421
Index: DFR-07421
Cytron SHIELD-2AMOTOR - 2-channel motor driver 26V/2A - shield for Arduino
Shield for Arduino with dual-channel DC motor driver operating with a voltage of 5 V to 26 V and current up to 2 A, based on the L298P circuit. The board has jumpers for...
Index: CTN-12404
Index: CTN-12404
See also