- New
- On sale!
- Promotion
- New
- On sale!
- Promotion
- Reduced price
- Promotion
Odroid M2 - minicomputer with Rockchip RK3588S2 processor + 8GB RAM
Index: ODR-25415
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Motor drivers modules - Strona 3
Loading...
M1U256 - single-channel motor controller 48V/2,2A with connectors - UART interface - Pololu 5062
A driver based on the M1U256 system that allows you to control one DC motor. It uses the UART TTL interface for communication. The module can work with motors supplied with...
Index: PLL-22772
Index: PLL-22772
- On sale!
- Promotion
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - Pololu 5072
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23646
Index: PLL-23646
- Reduced price
- Promotion
PWM motor driver DC 6-24V/3A/72W - with a speed control knob
Module with built-in rotary potentiometer for DC motor speed control by filling the PWM signal. It operates with motors from 6 V to 24 V up to 72 W (current consumption up to 3...
Index: PLL-06667
Index: PLL-06667
Haptic Motor Driver - DRV2605L - SparkFun ROB-14538
SparkFun module with DRV2605L haptic motor controller. It can handle ERM and LRA motors. Operates from 2 V to 5.2 V. Communicates over I2C bus.
Index: SPF-08219
Index: SPF-08219
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
Cytron SmartDriveDuo MDDS10 - two-channel 35V / 10A motor controller
Two-channel intelligent DC motor controller . Continuous current per channel 10 A (momentary 30 A). Supply voltage from 7 V to 35 V. It has interfaces such as UART, PWM,...
Index: CTN-12406
Index: CTN-12406
- Reduced price
- Promotion
Motor and servo driver for Micro:Bit - Waveshare 15220
Expansion board for module Micro:bit. It allows you to control 2 DC motors and 3 servos through the I2C interface with 12-bit resolution for each channel. It powers the motors...
Index: WSR-13303
Index: WSR-13303
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
M2U256 - two-channel motor controller 48V/1,8A - UART interface - Pololu 5067
A driver based on the M2U256 system that allows you to control two DC motors. It uses the UART TTL interface for communication. The M2U256 can work with motors supplied with...
Index: PLL-22593
Index: PLL-22593
- On sale!
- Promotion
SparkFun Ardumoto - Motor Driver Shield - L298 - hat for Arduino - SparkFun DEV-14129
SparkFun Ardumoto is a shield designed for use with Arduino that allows you to control up to two DC motors . It is equipped with the popular L298 H-bridge, thanks to...
Index: SPF-23852
Index: SPF-23852
- Reduced price
- Promotion
TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450
SparkFun module with two channel DC motor driver. It is powered from 2.7 V to 15 V . Continuous current per channel is 1.2 A. It has soldered goldpin connectors.
Index: SPF-10666
Index: SPF-10666
Grove - L298N - two-channel motor controller 15V / 1A
Grove series module equipped with a two-channel H-bridge L298N , controlled by ATmege 8L. The circuit allows to regulate the direction of rotation of motors with maximum...
Index: SEE-11320
Index: SEE-11320
- Reduced price
- Promotion
TB67H420FTG Dual/Single Motor Driver Carrier - Pololu 2997
Single channel DC motor controller. Continuous current per channel 2.6 A (momentary up to 5 A). Supply voltage from 4.5 V to 28 V .
Index: PLL-12059
Index: PLL-12059
Cytron Robot Combat Controller URC10 ATmega328P + driver engines 24V/10A compatible with Arduino
Dual-channel DC motor driver. The module can control the direction of rotation, start, stop and speed of the DC motors. Continuous current per 10 A channel (temporary 30 A)....
Index: CTN-12414
Index: CTN-12414
36v4 - High - Power Stepper Motor Driver 50V/6A - Pololu 3730
The DRV8711 stepper motor controller allows you to control one bipolar stepper motor. Powered from 8 V to 50 V, with a maximum current draw of 6 A per coil. Maximum...
Index: PLL-14787
Index: PLL-14787
Grove - L298P - two-channel motor driver 12V/2A - Seeedstudio 105020093
A module with an L298P motor controller that supports two DC motors or one stepper motor. The voltage supported by the controller is between 6 V and 12 V and the continuous...
Index: SEE-16906
Index: SEE-16906
Qwiic dual-channel motor controller - 11V / 1.2A - SparkFun ROB-15451
Dual channel DC motor driver module. Continuous current per channel is 1.2 A (temporary up to 1.5 A) . The device uses the I2C serial communication bus. The module is...
Index: SPF-21161
Index: SPF-21161
- Reduced price
- Promotion
Three -channel motor driver for Motoron M3S256 from Pololu. The input voltage is in the range from 4.5 V to 48 V , the continuous current consumption is up to 2 A , and...
Index: PLL-21357
Index: PLL-21357
M1T256 - single-channel motor controller 48V/2,2A - I2C interface - Pololu 5061
A driver based on the M1T256 system that allows you to control one DC motor. It uses the I2C interface for communication. The module can work with motors supplied with a...
Index: PLL-22771
Index: PLL-22771
Simply Robotics Motor Driver Board - motor driver - for Raspberry Pi Pico - Kitronik 5348
It imposes on the Raspberry Pi Pico extending the functionality of the module with the ability to control servos and motors. It allows you to simultaneously control 8 servos...
Index: KTR-22858
Index: KTR-22858
M1T550 - single motor controller 22V/1,8A - I2C interface - Pololu 5075
A controller from Pololu based on the M1T550 system enabling operation of a DC motor . It uses the I2C interface for communication. Works with engines powered by voltage...
Index: PLL-23645
Index: PLL-23645
- Reduced price
- Promotion
MC33926 2-channel motor driver 28V/3A - Shield for Arduino - Pololu 2503
Module with dual MC33926 system, working with voltages from 5 V to 28 V. The maximum continuous output current per channel is 3 A. The system can be connected directly with...
Index: PLL-01417
Index: PLL-01417
- On sale!
- Promotion
TLC5940 - controller, PWM generator - SparkFun BOB-10616
16-channel PWM signal generator. It communicates via the SPI bus. It can be used as an LED driver, the controller of revolutions of the DC motors and the servo controller.
Index: SPF-01856
Index: SPF-01856
- Reduced price
- Promotion
DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.
Index: DFR-07421
Index: DFR-07421
See also
