• New

M1T550 - single motor controller 22V/1,8A - I2C interface - Pololu 5075

Index: PLL-23645
A controller from Pololu based on the M1T550 system enabling operation of a DC motor . It uses the I2C interface for communication. Works with engines powered by voltage from 1.8 V to 22 V. The maximum output current per channel is 1.8 A. The set includes a goldpin strip for self-soldering .
M1T550 - single motor controller 22V/1,8A - I2C interface - Pololu 5075
€14.50
€11.79 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Product description: M1T550 - single-channel DC 22 V / 1.8 A motor controller - I2C interface - Pololu 5075

A controller from Pololu using the M1T550 system, which allows operation of one DC motor . The module communicates via the I2C interface . It can control motors powered with voltage from 1.8 V to 22 V. The maximum output current per channel is 1.8 A , with the possibility of jumps of several seconds to 5 A. The user can connect several controllers to the same I2C bus and expand the project with additional engines. The set includes a 1x12 goldpin strip with a 2.54 mm pitch for self-soldering .

The manufacturer provides a detailed user guide that makes it easier to start working with the module - check it out!

M1T550 - single-channel DC 22 V / 1.8 A motor controller - I2C interface - Pololu 5075.

The controller works with motors powered with voltage from 1.8 V to 22 V.

Main features of the M1T550 controller

  • Control of one DC motor
  • I2C interface
  • Possibility to connect multiple controllers to one bus and expand the project with additional engines
  • Protection against reverse voltage on the motor power supply up to 20 V
  • Optional cyclic redundancy check (CRC)
  • Configurable traffic parameters:
    • maximum acceleration/deceleration
    • initial speed
    • direction change delay
  • Eight PWM frequency options from 1 kHz to 80 kHz
  • Protection in case of connection loss
  • Configurable automatic error response
  • Engine supply voltage measurement (VIN)
  • Operating status indication via LED diodes

Technical specifications of the M1T550 controller

  • Number of channels: 1
  • Supply voltage: 1.8V to 22V
  • Operating voltage of the logic part: from 3 V to 4.9 V (5 V voltage is not recommended)
  • Continuous current per channel: 1.8 A
  • Maximum instantaneous current: 5 A
  • PWM frequency: 1 kHz to 80 kHz
  • Dimensions: 15.24 x 15.24 mm
  • Weight: 1.2 g

Set contents

  • M1T550 - single-channel DC motor controller 22 V / 1.8 A - I2C interface - Pololu 5075
  • Goldpin strip 1x12 pitch 2.54 mm

The module is based on the M1T550 system.

Voltage to 1.8 V
Voltage from 22.0 V
Current 1.8 A
Package width 7.5 cm
Package height 8.5 cm
Package depth 0.5 cm
Package weight 0.003 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: