- New
Product description: M2T550 - two-channel DC 22 V / 1.6 A motor controller - I2C interface - Pololu 5079
The Pololu controller allows you to operate two DC motors . It uses the M2T550 chip and communicates via the I2C interface . It can control motors powered with voltage from 1.8 V to 22 V. The maximum output current per channel is 1.6 A , with the possibility of jumps up to 5 A in a few seconds. The user can connect several controllers to the same I2C bus and expand the project with additional motors. The set includes a 1x16 goldpin strip with a 2.54 mm pitch for self-soldering .
The manufacturer provides a detailed user guide that makes it easier to start working with the module - check it out!
M2T550 - two-channel DC 22 V / 1.6 A motor controller - I2C interface - Pololu 5079.
The controller works with motors powered with voltage from 1.8 V to 22 V.
Main features of the M2T550 controller
- Control of two DC motors
- I2C interface
- Possibility to connect multiple controllers to one bus and expand the project with additional engines
- Protection against reverse voltage on the motor power supply up to 20 V
- Optional cyclic redundancy check (CRC)
- Configurable traffic parameters:
- maximum acceleration/deceleration
- initial speed
- delay in changing direction
- Eight PWM frequency options from 1 kHz to 80 kHz
- Protection in case of connection loss
- Configurable automatic error response
- Measuring the engine supply voltage (VIN)
- Operating status indication via LED diodes
Technical specifications of the M2T550 controller
- Number of channels: 2
- Supply voltage: 1.8V to 22V
- Operating voltage of the logic part: from 3 V to 4.9 V (5 V voltage is not recommended)
- Continuous current per channel: 1.6 A
- Maximum instantaneous current: 5 A
- PWM frequency: 1 kHz to 80 kHz
- Dimensions: 20.32 x 15.24 mm
- Weight: 1.5 g
Set contents
- M2T550 - two-channel DC 22 V / 1.6 A motor controller - I2C interface - Pololu 5079
- Goldpin strip 1x16 pitch 2.54 mm
The module is based on the M2T550 system.
