Arduino Shield - communication - Strona 2
DFRobot DTMF - Shield for Arduino
Overlay for Arduino that allows detection and decoding of DTMF signal. Module allows to control Ar duino with audio commands from any phone.B-GSMGNSS Shield v2.105 GSM/GPRS/SMS/DTMF GPS Bluetooth for Raspberry Pi + connectors for Arduino
Module cooperating with Arduino and Raspberry Pi, which enables communication in GSM and GPRS standard and also GPS + GLONASS and Bluetooth communication. Based on...B-GSMGNSS Shield v2.105 GSM/GPRS/SMS/DTMF + GPS + Bluetooth for Arduino and Raspberry Pi
Module cooperating with Arduino and Raspberry Pi, which enables communication in GSM and GPRS standard and also GPS + GLONASS and Bluetooth communication. Based on...DFRobot FireBeetle LoRa 433MHz
The FireBeetle module compatible with Arduino, equipped with LoRa SX127x 433 MHz module with built-in PA (Power Amplifier), controlling is through SPI interface. It is used for...Arduino Ethernet Shield ASX00006 MKR - Shield for Arduino MKR
Shield for Arduino MKR enabling the connection to the Ethernet network . It is equipped with a system W5500 and a connector for microSD cards. It c ommunicates via the SPI...Arduino MKR GPS Shield ASX00017 - Shield for Arduino MKR
Overlay for Arduino MKR series, allows you to create projects that require GPS location determination. On the board is integrated GNSS u-blox SAM-M8Q . The device can be...Arduino Edge Control - outdoor environments Bluetooth controller - Arduino AKX00034
Controller equipped with Bluetooth chip for remote monitoring and control, optimized for outdoor environments . The board is equipped with a socket for plugging in any...xyz-mIoT BG95M2 GSM LTE NB IoT EGPRS GNSS module - for Arduino and Raspberry Pi
The xyz-mIoT board is equipped with the Quectel BG95M2 module, which enables LTE CATM1 + NB IoT (CAT NB2 + NB1) communication with GNSS positioning. The module is based on...Ultimate GPS Logger Shield with SD card reader - Shield for Arduino - Adafruit 1272
Shield for Arduino with a GPS module and a slot for micro SD card. It can be used as a data logger that has an internal antenna and a connector for an external version. It...NFC Shield v2.0 - Shield for Arduino
Shield for Arduino, enabling the reading of data from the NFC and RFID devices at 13.56 MHz. The module has a built-in antenna, is powered from Arduino pins, it communicates...RS485/CAN - Shield for Arduino - Waveshare 10771
Shield that allows you to connect the Arduino to the RS485 interface or CAN bus. It is equipped with drivers: MAX3485 and SN65HVD230 for the CAN, it works with the Uno,...DataLogger Shield V1.0 RTC DS1307 with SD card reader - Shield for Arduino - Iduino ST1046
Shield for Arduino with RTC DS1307 and a slot for SD memory cards. It can be used as a data logger, it has a place for a round CR1220 battery and for additional module. It...DFRobot - SIM7600CE-T 4G (LTE) - shield do Arduino
Shield for Arduino module which allows you to send text messages and create calls in the GSM network. It is also equipped with GPS and LTE module. It communicates via UART...IoT LoRa Node Shield 868MHz/915MHz - shield for Arduino
IoT LoRa Node Shield is an overlay dedicated to main modules with Arduino type microcontroller. The module allows to create LoRa nodes compatible with The Things Network in...XBee 3 wireless communication kit - SparkFun KIT-15936
This kit allows to implement wireless communication to our project with Arduino using XBee 3 modules. The modules support 802.15.4, ZigBee and BLE protocols . UART and SPI...Arduino Ethernet Shield 2 with microSD reader- A000024
Shield for Arduino allows users to easily connect to the Ethernet network. Module based on W5500, it also has a microSD card slot.SIM868 GSM/GPRS/GNSS + Bluetooth - communication module for Raspberry Pi Pico - Waveshare 20268
CAN FD Expansion HAT is a CAN bus expansion overlay produced by Waveshare. It supports the original CAN 2.0 protocol and the CAN FD expansion with higher data throughput....