Product description: xyz-mIoT BG95M2 GSM LTE NB IoT EGPRS GNSS module - for Arduino and Raspberry Pi
The xyz-mIoT board from Itbrain Power is equipped with the Quectel BG95M2 module, which enables LTE CATM1 + NB IoT communication (CAT NB2 + NB1) with GNSS positioning. The module is based on the ATSAMD21G ARM Cortex-M0 32-bit, clocked at 32.768 kHz, 256 kB / 32 kB Flash / SRAM memory. The board supports nano SIM / uSIM cards. On the board you can also find the u.Fl antenna connector and a microUSB connector that allow for powering and programming the module. Thanks to the solder pads placed on the board, you can extend the module's capabilities with sensors: THS, Co2 + TVOC, Hall, IR and vibration / tilt. The module works with voltages of 3.3 V and is equipped with numerous popular communication interfaces, such as: digital and analog pins, PWM, UART, SPI, I2C and external interrupts.
Xyz-mIoT BG95M2 module. 
GSM, LTE, NB IoT wireless communication module.Main features of the xyz-mIoT BG95M2 module
- Atmel ATSAMD21G (AMR0) supported by Arduino
- Nano SIM LTE / 4G card slot
- Soldering pads for an external SIM card slot
- Soldering pads for USB modem
- UART port modem solder pads for AT debugging
- Type B miniUSB port for programming, can also be used for power supply
- 13x digital pins (12 PWM ports)
- 1x hardware UART
- 1x I2C
- 1x SPI
- All pins work with a voltage of 3.3 V.
- 5x analog inputs
Specification of the xyz-mIoT BG95M2 module
- Built-in modem: Quectel BG95M2
- Microcontroller: SAMD21G Cortex-M0 + 32-bit
- Frequency: 48 MHz
- RTCC: 32.768 kHz
- Flash memory: 256 KB
- SRAM memory: 32 kB
- 13 pins I / O (voltage 3.3 V)
- 12 with the possibility of PWM
- 5 analog inputs
- UART, I2C, SPI interfaces
- 8 external interrupt
- Current efficiency of leads: 7 mA
- Supported standards: LTE CAT M1 / NB IoT (NB1 and NB2) / GNSS
- Bands:
- LTE CAT M:
- B1 / B2 / B3 / B4 / B5 / B8 / B12 / B13 / B18 / B19 / B20 / B25 / B26 / B27 / B28 / B66 / B85
- NB IoT:
- B1 / B2 / B3 / B4 / B5 / B8 / B12 / B13 / B18 / B19 / B20 / B25 / B28 / B66 / B71 / B85
- LTE CAT M:
- Speeds:
- CAT M1: up to max. 588 kbps (DL), max. 1119 kbps (UL)
- CAT NB2 - Up to max. 127 kbps (DL), max. 158.5 kbps (UL)
- CAT NB1: Up to max. 32 kbps (DL), max. 70 kbps
- GNSS: Galileo, GPS, GLONASS, BeiDou / Compass, QZSS
- Nano SIM / micro SIM connector
- U.FL antenna connectors
- THS sensor
- TVOC and eCO2 sensor
- Works with Arduino and Raspberry Pi
- Dimensions: 35.56 x 45.72 mm
Kit contents
- 1x xyz-mIoT BG95M2 GSM LTE NB IoT EGPRS GNSS module - for Arduino and Raspberry Pi
Xyz-mIoT BG95M2 GSM LTE NB IoT EGPRS GNSS module - for Arduino and Raspberry Pi.
