- New
Prusa Nozzle Brass 0,3mm for Nextruder - 1,75mm filament - brass
Index: PSA-26403
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
ROBOTS AND MECHANICS - Strona 6
Loading...
Klaw MK2 Robotic Gripper Kit with servo - Kitronik 25104
The gripper kit can be a great addition to the robot design. The gripper is controlled by a servo motor , which is powered from 3 V to 6 V. The maximum span of the gripper...
Index: KTR-16879
Index: KTR-16879
Toothed belt 10x198mm + gear 12T - 8mm - 2 pieces
A set of belt and compatible gears . The circumference of the belt is approximately 198mm and the width is 10mm . The wheel has 12 teeth . The tooth surface width is...
Index: GRL-12559
Index: GRL-12559
Micro motor N20-BT16 10:1 2000RPM - 9V
The N20 series miniature motor with 10:1 gearing, has 2000 RPM , torque is 0.3 kg*cm (0.029 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12555
Index: DNG-12555
HPCB Motor with 75:1 Gear - doublesided shaft - Pololu 3074
Polol' s miniature high power engine with durable carbon brushes. It has a 75:1 transmission, speed is 400 rpm , and torque is 1.6 kg*cm (0.15 Nm). It has an extended...
Index: PLL-05094
Index: PLL-05094
Aluminum double gear wheel having 20 teeth each. The product is a mounting element in which the width of the single wheel is 15 mm , the height is 28 mm and the hole...
Index: GRL-12577
Index: GRL-12577
Micro motor N20-BT14 30:1 440RPM - 9V
The N20 series miniature motor with 30:1 gearing, has 440 RPM , torque is 0.28 kg*cm (0.0275 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12553
Index: DNG-12553
- Reduced price
- SPECIAL OFFERS
Aluminum gear with 10 teeth . The product is a mounting element, the diameter of which is 19 mm , the height is 23 mm and the hole diameter is 4 mm .
Index: GRL-12575
Index: GRL-12575
Micro motor N20-BT43 210:1 100RPM - 6V
The miniature motor of N20 series with 210:1 gearing, has 100 rpm, torque is 2.6 kg*cm (0.255 Nm). The supply voltage is 6 volts.
Index: DNG-12605
Index: DNG-12605
DFRobot Gravity - vibration motor module
Module from the Gravity series with vibration motor for Arduino controlled with the PWM signal, low and high status. The supply voltage is 5 V.
Index: DFR-11287
Index: DFR-11287
Set of 20 pieces of shafts with the length of 20 mm and a diameter of 3 mm.
Index: GRL-12519
Index: GRL-12519
Micro motor N20-BT34 298:1 45RPM - 9V
The miniature motor in the N20 series with 298:1 gearing, has 45 RPM , and the torque is 2.9 kg*cm (0.284 Nm) . The supply voltage ranges from 3 V to 9 V.
Index: DNG-12593
Index: DNG-12593
DC Motor with Gear 6V 300RPM + encoder
Motor with 20:1 gearing , 300 rpm , 3.6 kg*cm (0.35 Nm) torque. DC current is 2.7 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...
Index: DFR-09527
Index: DFR-09527
DC Motor with Gear 6V 210RPM + encoder
Motor with 34:1 gearing , 210 rpm, 10.0 kg*cm (0.9 Nm) torque. DC current is 3.2 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...
Index: DFR-09531
Index: DFR-09531
Linear Actuator LA-T5 500N 30mm/s 12V - stroke 15cm
Linear actuator with a maximum extension of 15 cm , protected by two limit switches. The device has an IP65 protection class, so it can be installed in areas of high humidity....
Index: WLS-17108
Index: WLS-17108
- Reduced price
- SPECIAL OFFERS
Mounting for the MT86 motors or other, with the size of about 24 mm. Mounting hole diameter is 2.5 mm.
Index: NSZ-09788
Index: NSZ-09788
Stepper Motor JK42HS40-1206 200 steps 3,6V/1,2A/0,27Nm
Unipolar stepper motor , six-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 3.6 V, draws 1200 mA per coil. Torque is 2.8 kg*cm (0.27 Nm)....
Index: MOT-03611
Index: MOT-03611
Aluminum Servo Mount Feetech FK-FP-001
Aluminum plate is used as a foot of a robot, connecting with a side mount of a servo. Dimensions: 105 x 60 x 2 mm. Weight: 25g.
Index: FTC-09201
Index: FTC-09201
- Sale
- SPECIAL OFFERS
DFRobot Gravity - DC motor + propeller module
Module with DC motor and built-in transistor, it does not require an additional driver. Control is via PWM signal. It has a connector adapted to DFRobot IO Expansion Shield.
Index: DFR-05965
Index: DFR-05965
Linear Actuator Super Power Jack 1500N 20mm/s 24V - 40cm stroke
Industrial, professional FDI electric actuator powered by 24 V , suitable for heavy duty applications. The FDI series is characterized by motors made of the highest quality...
Index: ELB-15883
Index: ELB-15883
DFRobot Baron 4WD - Rectangular Chassis 4WD with DC Motor Drive
Platform with four-wheel drive is made of durable aluminum. It can climb and overcome obstacles. The set also includes 4 DC motors with encoders that can be controlled using...
Index: DFR-05967
Index: DFR-05967
Jog knob to linear system calibrating
The handwheel for linear systems is an invaluable helper during operations such as levelling CNC equipment or testing linear systems before motor assembly.
Index: VST-17338
Index: VST-17338
Stepper Motor JK20HS30-0604A 200 steps 3,9V/0,6A/0,02Nm
Bipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 3.9 V and draws 600 mA per coil. The torque is 0.18 kg*cm...
Index: MOT-04848
Index: MOT-04848
HPCB Motor with 30:1 Gear - doublesided shaft - Pololu 3072
Polol' s miniature high power engine with durable carbon brushes. It has a 30:1 transmission, speed is 1000 rpm , torque is 0.45 kg*cm (0.044 Nm). It has an extended...
Index: PLL-05092
Index: PLL-05092
Ball Caster 1/2" - metal - Pololu 953
Metal ball in the bowl with a diameter of 1/2 inches, it is ideal to use to support the front of the two-wheeled robot.
Index: PLL-00137
Index: PLL-00137