Ampgenol FCI Clincher connector - female 3x - SparkFun COM-14196
Index: SPF-09141
- Reduced price
- Promotion
DRV8801 - single-channel motor controller 36V / 1A - Pololu 2136
Index: PLL-01256
- On sale!
- Promotion
Aqara Single Switch Module T1 - No Neutral - white - SSM-U02
Index: BNA-23674
- Reduced price
- Promotion
- Reduced price
- Promotion
List of products by brand Seeedstudio - Strona 24
Loading...
Camera Optor Visual-Inercial SLAM for PC
Optor camera designed for visual algorithm developers. It has interfaces for hardware control and a data interface for reducing the development threshold with clear images and...
Index: EDJ-11103
Index: EDJ-11103
- EOL
A small, lightweight 5W water pump. Powered by 6 V DC. Can be used e.g. for flower watering systems.
Index: SEE-04388
Index: SEE-04388
- EOL
Engine with 3V 1.4l/h air pump
Blower fan motor supplied at 6 volts with approx. 0.4 l/h (0.07 litres per minute).
Index: SEE-04389
Index: SEE-04389
- EOL
DSO Quad - 4-channel portable oscilloscope in aluminum housing
DSO Quad is a portable, 4-channel digital oscilloscope. It is built on the basis of microcontroller STM32F103VCT6 with core ARM Cortex M3. 32-bit platform provides the sampling...
Index: SEE-04393
Index: SEE-04393
- EOL
Display e-Paper 2 '' 200x96px (without module)
2" e-paper screen in E-Ink technology with a resolution of 200 x 96 px. Compatible with Arduino e-paper Shield overlay.
Index: SEE-04403
Index: SEE-04403
- EOL
Liquid flow sensor DN32 120l/min - thread 5/4''
Liquid flow sensor operating from 1 to 120 litres per minute. It is supplied with voltage from 5 V to 24 V, the output signal is a frequency proportional to the measured value.
Index: SEE-04407
Index: SEE-04407
- EOL
CAN-Bus Shield v1.2 - overlay on Arduino
Arduino overlay for using CAN serial bus. Equipped with MCP2515 and MCP2551 systems. It communicates through SPI interface. It works with voltage of 5 V.
Index: SEE-04423
Index: SEE-04423
- EOL
3.6V water generator - 1/2 '' thread - with a 700mAh battery
Water generator with 3.6 V output voltage. It has a Lipol 700 mAh battery included. Threads are 1/2" in diameter, maximum flow is 20 l/min.
Index: SEE-04425
Index: SEE-04425
- EOL
Touch sensor + 4 buttons - Grove
Touch sensor based on Freescale MPR121 chip, consisting of a controller and four buttons. It is powered from 3 V to 5.5 V and communicates via the I2C bus.
Index: SEE-04435
Index: SEE-04435
- EOL
A miniature module to support the 13.56 MHz NFC system. The board is based on NXP PN512. It operates with voltage from 3.3 V to 6 V. The maximum transmission distance is about...
Index: SEE-07230
Index: SEE-07230
- EOL
Seeeduino Lotus - ATMega328 Board with Grove Interface
Seeedstudio module equipped with ATmega328 microcontroller. It is a combination of Seeeduino and Base Shield v2. Output layout is compatible with Arduino Uno. It has 14 digital...
Index: SEE-07234
Index: SEE-07234
- EOL
Raspberry Pi overlay with 0.91" display with 128 x 32 px resolution. It has an ssd1306 controller. It communicates via the I2C interface. Connected directly to the GPIO...
Index: SEE-09669
Index: SEE-09669
- EOL
Micro:bit overlay equipped with four 4-pin Grove outputs to connect sensors from this series to the device.
Index: SEE-10603
Index: SEE-10603
- EOL
Air602 is a 2.4 GHz Wi-Fi module supporting IEEE802.11 b/g/e/i/d/k/r/s/w/n standards and AT commands. It is based on W600 chip and has 12 outputs. It is characterized by very...
Index: SEE-13347
Index: SEE-13347
- EOL
The board is based on Air602 module with W600 microcontroller, has Cortex-M3 core 1 MB flash and 128 KB + 160 KB RAM, hardware support for cryptographic functions, DMA and...
Index: SEE-13348
Index: SEE-13348
- EOL
Engine with air pump 6V 120l/h
Blower fan motor supplied at 6 volts with an output of approx. 120 l/h (2 litres per minute).
Index: SEE-04386
Index: SEE-04386
- EOL
Small, lightweight, high-capacity water pump 78 l/h (1.31 l/min). Powered by 12 V DC. Can be used e.g. for flower watering systems.
Index: SEE-04387
Index: SEE-04387
- EOL
Screen Seeed studio LCD IPS 5" 720x1280px for Raspberry Pi 3B+/3B/2B/Zero - black case
Screen Seeed studio 5" with a resolution of 720 x 1280 px with a wide-angle IPS. Works with Raspberry Pi in versions 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero and Zero W via the HDMI...
Index: SEE-13969
Index: SEE-13969
- EOL
Door opening sensor - Dragino LoRaWAN - EU868MHz - LDS01
Door opening sensor from Dragino. Enables detection of door opening/closing status and allows to keep statistics of these events. Powered by CR2032 battery. For wireless...
Index: SEE-18359
Index: SEE-18359
- EOL
Jetson Mate - carrier plate for Jetson Nano / NX - with fan - Seeedstudio 110991411
The Jetson Mate is a carrier board on which up to 4 Nvidia Jetson Nano / NX SoM modules can be installed. Equipped with a 5-port gigabit switch that allows...
Index: SEE-18786
Index: SEE-18786
- EOL
A digital CO2 concentration sensor that works with non-dispersive NDIR technology. A non-dispersive sensor, which means that there is no element that splits light into its...
Index: SEE-18787
Index: SEE-18787
- EOL
Quantum Tiny Linux development kit - SoM chip + Expansion board - Seeedstudio 114992462
Quantum Tiny Linux is a software board that consists of the SoM Quark-N (System on Module) chip and the Atom-N carrier board. The SoM Quark-N is based on the Allwinner H3...
Index: SEE-18788
Index: SEE-18788
- EOL
Case for Jetson Nano - with fan, antenna mounts, camera holders and buttons - Seedstudio 114992374
Aluminum enclosure for Jetson Nano providing high protection for the module. It has built-in cooling fan and special ventilation holes, which improve cooling and heat...
Index: SEE-18804
Index: SEE-18804
- EOL
MAIX-II Dock development board set from Seeedstudio . It consists of the MAIX-II base module and the MAIX-II Dock development board. It is equipped with Allwinner V831...
Index: SEE-18807
Index: SEE-18807
- EOL