Product description: Linear actuator LACT6-12V-20 500N 13mm/s 12V - 15cm stroke
Linear actuator with a gearbox 20:1, powered by 12 V. It operates with a load of up to 50 kg, the average travel speed is 1.3 cm/s. The device consumes approx. 500 mA of current with no load. With a blocked shaft this value can rise to 10 A. There are limit sensors at the ends to prevent the shaft from moving beyond the permissible range. This version has a 15 cm extension shaft, but no built-in potentiometer.
- Supply voltage: 12 V
- Parameters for 12 V:
- No-load current consumption: 500 mA
- Maximum current consumption (with shaft locked): 10 A
- Linear speed: 1.3 cm/s
- Maximum loads: 50 kg
- Shaft extension range: 15 cm
- Weight: 1077 g
The device has the following wires:
- Red and black - are the power supply to the actuator. Depending on the polarity, the motor will move the shaft forward or backward.
To operate the actuator you can use any controller with parameters compatible with the motor, e.g. suitable systems from the HighPower series. We also offer a JRK 21v3 controller, which supports feedback.