- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: SparkFun MicroMod WiFi Function Board - ESP32 - SparkFun WRL-18430
SparkFun MicroMod WiFi Function Boardextension designed for MicroMod series boards. It allows you to add WiFi and Bluetooth wireless communication to your designs. It is equipped with an ESP32-WROOM-32E dual-core Xtensa® LX6 processor clocked at up to 240 MHz, 16 MB of Flash memory and 520 kB of internal SRAM. It has integrated WiFi 802.11 b/g/n transceiver and Bluetooth dual-mode capabilities. It has a MicroMod M.2 connector, so you can connect any MicroMod processor board that is part of the SparkFun MicroMod ecosystem to it. The SparkFun MicroMod WiFi Function Board - ESP32 can be programmed using AT commands via the serial UART port.
The kit does not include the SparkFun MicroMod processor, which is required for proper operation of the module.
Example of peripheral devices connection. The subject of the sale is only SparkFun MicroMod WiFi Function Board - ESP32.What is MicroMod? What is MicroMod?
MicroMod is a modular interface ecosystem that allows you to easily and quickly connect your SparkFun MicroMod microcontroller to various peripherals - sensors and accessories. The system uses the M.2 standard, so you can quickly and seamlessly exchange available processor boards, depending on your current needs. This solution significantly simplifies the whole prototyping process.
SparkFun MicroMod WiFi Function Board - ESP32 specification
- Embedded chip: ESP32-WROOM-32E
- Dual core 32-bit Xtensa® LX6
- Clocked at up to 240 MHz
- 16 MB Flash memory
- 520 kB internal SRAM
- Integrated WiFi 802.11 b/g/n transceiver
- Integrated dual-mode Bluetooth (Classic and BLE)
- Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
- Current consumption up to 2.5 µA in sleep mode
- Input voltage: 2.5 V to 6 V
- Typically 5 V through USB connector
- Typically 3.7 V to 4.2 V via Li-Pol battery connector (located on main board - sold separately)
- Logic voltage 3.3 V
- Interface: M.2 MicroMod Edge
- 1x USB type C connector for power and programming
- USB-UART converter: CP2102
- Voltage Stabilizer: AP2112 3.3 V / 600 mA
- Boot and reset buttons
Contents of the kit
- SparkFun MicroMod WiFi Function Board - ESP32 - SparkFun WRL-18430
SparkFun MicroMod WiFi Function Board - ESP32.
