- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Filament Fiberlogy FiberFlex 30D 1.75 mm 0.5 kg - Black
Black filament from Fiberlogy, designed for 3D printers working in FFF / FDM technology. Rubber-like material, characterized by extraordinary flexibility and high impact and tensile strength. The hardness of the filament is 30D on the Shore scale . FiberFlex 30D prints are highly resistant to chemicals such as greases, oils and many solvents. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. For easier removal of the printout, it is recommended to heat the bed to 110°C degrees.
Filament Fiberlogy FiberFlex 30D 1.75 mm 0.5 kg - Black.
FiberFlex is a durable, flexible material.
FiberFlex 30D filament properties
- Shore 30D hardness
- Flexibility and impact resistance
- High impact strength at low temperatures
- Very good chemical resistance
Use of FiberFlex 30D filament
- Rubber machine parts: gaskets, elements requiring frequent bending
- Gadgets and their parts: phone cases, watch straps
- Connecting elements: flexible hinges
- Toys and their parts: tires, rubber figures
- Jewelry: wristbands, bracelets
Suggested filament printing parameters
| printing temperature | From 200°C to 220°C |
| table temperature | From 50°C to 70°C |
| Print cooling | recommended |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Filament dimensional tolerance | +/- 0.05mm |
| Color | Black |
| printing temperature | From 200°C to 220°C |
| table temperature | From 50°C to 70°C |
| Print speed | < 35mm/sec |
| Spool - material | Fiberflex 30D |
| Desiccant | Yes |
| Vacuum packing | Yes |
| roundness | +/- 0.03mm |
| net weight | 0.5 kg |
