



GPS antenna with SMA connector is mounted on the magnets, powered with the voltage of 3.3 V.
Attention! The product has been discontinued. Check others products in category. |
The antenna is mounted on a magnet with SMA connector, powered with the voltage of 3 V. It is designed for road vehicles. The magnet can keep the antenna even at speeds above 160 km/h.
VSWR - the ratio of matching the transmission line to its load. The higher the SWR is, the greater the mismatch of lines.
Useful links |
Antenna - Connector type | SMA |
Antenna - Type: | GPS |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom
Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden
No customer reviews for the moment.
STM32F407G-DISC1 - Discovery - STM32F4DISCOVERY
The commissioning kit is built on the basis of STM32F407VGT6 microcontroller, it allows you to get to know the systems equipped with the latest Cortex-M4F core from ARM...Soldering station WEP 937D - 40W
Grotto WEP soldering station 937D with power of 40W and adjustable temperature from 200 °C to 480 °C. It has a LED display which shows the set temperature of the soldering tip.Arduino Mega 2560 Rev3 - module A000067
Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...Customers who bought this product also bought:
Temperature sensor DS18B20 - digital 1-wire THT
Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.ACS709 current sensor -75A do +75A - Pololu 2199
Current sensor working in the range of +/- 75 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.Receiver Venus GPS with connector SMA 3.3V - SparkFun
Versatile GPS receiver based on Venus638FLPx with high refresh rate of 20 Hz. It has a connector for emergency power supply, built-in Flash memory with the possibility of...SD card reader module - SparkFun BOB-12941
Module of the SD MMC memory card reader from the SparkFun. It provides communication with the main board (e.g. Arduino or STM32Discovery).Female socket extended 1x10 raster 2,54mm for Arduino - 5pcs
10-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm. Pirce for 5 pcs of connectors.DC 5,5x2,5mm socket for printing - horizontal
DC φ5.5 x 2.1 mm socket for printing made of plastic.Receiver module GPS-GMS-U1LP GPS
MediaTek GPS receiver module with an internal antenna in a surface soldered SMD housing. The system is characterized by low power consumption - up to 30 mA. It is also...Receiver GPS Venus Logger with SMA 3,5-12V connector - SparkFun
Versatile GPS receiver based on Venus638FLPx with high refresh rate of 20 Hz. It has a PHR-2 connector for direct connection of the li-pol battery and the possibility of...Arduino Box - case for Arduino - A000009
Housing for Arduino modules. In addition to space for the main module, the box also has space for a shield and 9 V battery.Arduino Proto Shield Mega Rev3 - A000080
Shield for Arduino Mega, allowing you to create your own systems (shields). The model is suitable for the latest versions of the family Arduino Mega Rev3.Linear voltage regulator 5V L7805ABV - THT TO220
Stabilizer used to supply logic systems supplied with 5 V. The maximum output current is 1 A.RandomCategoryProducts
DC Motor - Tamiya 980112M Mabuchi FA-130
Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.Micro-Match connector for 10-pin tape
Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.Pololu LPY550AL 2-axis XZ gyroscope
A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...3-axis magnetometer, digital MAG3110
3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.HiTechnic color sensor - for Lego Mindstorms EV3 and NXT
The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.Servomechanism - Lego Mindstorms NXT
The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.USB Bluetooth adapter - Lego Mindstorms NXT
Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.Receiver module GPS-FGPMMOPA6H GPS
Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.