Description: Odroid HC4 - Amlogic S905X3 Quad-Core 1.8GHz + 4GB RAM
The Odroid HC4 minicomputer is based on the same processor as Odroid C4 -Amlogic S905X3 Quad-CorewithARM Cortex A55core at 1.8 GHz. The device is equipped with4 GB of RAM, Mali-G31 graphics, microSD card slot, two SATA connectors, HDMI, USB connector and Gigabit Ethernet port. The HC4 was created with the vision of creating high-performance NAS / Home Cloud servers. The minicomputer is enclosed ina transparent housingwith access to all ports of the device.
Odroid HC4 allows you to connect two 3.5" HDDs, two SSDs or 2.5" HDDs, as well as one 3.5" HDD and one 2.5" SSD.
Odroid HC4 Minicomputer with HDDs connected.
The kit does not include drives and OLED display.
Odroid HC4.
|
Also availablewith OLED display. |
What do I need to run my Odroid HC4 minicomputer?
- MicroSD memory card- a memory carrier on which the operating system will be installed.
- Power supply 15 V / 4 A- minicomputer equipped with 5.5 / 2.1 mm DC socket.
- HDMI cable- to connect the device with a monitor or other display.
- Mouse and keyboard- to navigate the system interface and enter data.
Operating system for Odroid HC4
The Odroid HC4 Minicomputer has a function to boot from the hard drive via the SATA port whena microSD cardis not inserted. It works with Linux Debian / Ubuntu and other Linux systems with kernel 4.9.230 or higher, and Mainline with kernel 5.8 or higher.
The distribution of components on the Odroid HC4 board
| N. | Description |
|---|---|
| A | Amlogic S905X3 processor |
| B | 4GB DDR4 RAM |
| C | 2x SATA port |
| D | RJ45 port 10/100/1000 Mb/s |
| E | HDMI 2.0 port |
| F | USB 2.0 port |
| G | DC jack 5.5 / 2.1 mm |
| H | 2x status LED |
| I | UART Port |
| J | IR Receiver |
| K | 5x GPIO pin (for optional OLED display) |
| L | MicroSD card slot |
| M | Fan connector |
| N | System start-up switch |
The distribution of the elements on the board.
Specification Odroid HC4
|
|
| Model | HC4 odroid |
| Processor | Amlogic S905X3 |
| Core |
Quad-Core 64-bit ARM Cortex A55 |
| Graphics | Nali-G31 MP2 |
| Systems |
Ubuntu / Debian Android Pie |
| Clocking | 1.8 GHz |
| Architecture | ARMv8-A |
| Memory RAM | 4 GB DDR4 |
| Memory |
microSD card SATA for two 2.5" / 3.5" drives |
| GPIO socket | 5-pin connector for OLED display |
| Power supply |
15 V / 4 A DC Jack 5.5 / 2.1 mm |
| Dimensions of the tiles | 90,5 x 84 x 25 mm |
| USB Host | USB 2.0 socket type A |
| USB OTG | - |
| Network interface | 10/100/1000 Mbps Ethernet |
| RTC system | - |
| Video | HDMI 2.0 |
| Audio | HDMI |
| ADC transmitter | - |
| Communication | UART, GPIO |
Useful links |
