Product description: Odroid HC4 - Amlogic S905X3 Quad-Core 1.8 GHz + 4 GB RAM + OLED
Odroid HC4 is a minicomputer designed to create high-performance NAS / Home Cloud servers. The minicomputer is based on Quad-CoreAmlogic S905X3processor withARM Cortex A55core at1.8 GHz. It is equipped with4 GB of RAM, Mali-G31 graphics, memory card slot, two SATA connectors, HDMI and USB, Gigabit Ethernet port and OLED display. The HC4 is enclosed in a transparent housing with access to all connectors. Thanks to the two SATA ports, two hard drives can be connected in configuration: 2x 3.5" HDD, 2x 2.5" SSD, 1x 3.5" HDD + 1x 3.5" SSD.
Odroid HC4 Minicomputer with display and connected HDDs.
The kit does not include the drives.
Odroid HC4.
|
Also availablewithout OLED display. |
What do I need to run my Odroid HC4 minicomputer?
- MicroSD memory card- media with the operating system installed.
- Power supply 15 V / 4 A- equipped with a 5.5 / 2.1 mm DC socket.
- HDMI cable- to connect the device with a monitor or other display.
- Mouse and keyboard- to navigate through the system interface and enter data.
Operating system for Odroid HC4
Odroid HC4 has the ability to boot from the hard drive via the SATA port, whilethe microSD cardis not in the slot. The minicomputer supports Linux Debian / Ubuntu and other Linux systems with the kernel version 4.9.230 or higher, and Mainline with the kernel version 5.8 or higher.
Layout of components on the Odroid HC4 board
| N. | Description |
|---|---|
| A | Amlogic S905X3 processor |
| B | 4GB DDR4 RAM |
| C | 2x SATA port |
| D | RJ45 port 10/100/1000 Mb/s |
| E | HDMI 2.0 port |
| F | USB 2.0 port |
| G | DC jack 5.5 / 2.1 mm |
| H | 2x status LED |
| I | UART Port |
| J | IR Receiver |
| K | 5x GPIO pin (for optional OLED display) |
| L | MicroSD card slot |
| M | Fan connector |
| N | System start-up switch |
The distribution of the elements on the tile.
Specification Odroid HC4
|
|
| Model | Odroid HC4 with OLED display |
| Processor | Amlogic S905X3 |
| Core | Quad-Core 64-bit ARM Cortex A55 |
| Graphics | Nali-G31 MP2 |
| Systems | Ubuntu / Debian Android Pie |
| Clocking | 1.8 GHz |
| Architecture | ARMv8-A |
| Memory RAM | 4 GB DDR4 |
| Memory | microSD card SATA for two 2.5" / 3.5" drives |
| GPIO socket | 5-pin connector for OLED display |
| Power supply | 15 V / 4 A DC Jack 5.5 / 2.1 mm |
| Dimensions of the tiles | 90,5 x 84 x 25 mm |
| USB Host | USB 2.0 socket type A |
| USB OTG | - |
| Network interface | 10/100/1000 Mbps Ethernet |
| RTC system | - |
| Video | HDMI 2.0 |
| Audio | HDMI |
| ADC transmitter | - |
| Communication | UART, GPIO |
Useful links |
